This part of EN 28510 specifies a 90° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends where at least one adherend is flexible. If a normal tensile testing machine is used for the test, the peel angle will not be constant at exactly 90º. If a constant angle of exactly 90° is required, a roller peeling device is used (see 4.1).
The 90º peel test is particularly suitable for use with less flexible adherends for which a 180° peel test is not suitable because the adherends crack, break or delaminate.
A 180º peel test is described in EN ISO 8510 2.
WITHDRAWN
EN 28510-1:1993
PUBLISHED
EN 28510-1:2014
90.93
Standard confirmed
Jul 15, 2025