EN 17645:2022

Domestic swimming pools - Environmental performance efficiency - Performance evaluation, methodology, and classification of the use of outdoor pools and their equipment EN 17645:2022

Publication date:   Oct 17, 2022

General information

60.60 Standard published   Aug 24, 2022

CEN

CEN/TC 402 Domestic Pools and Spas

European Norm

97.220.10   Sports facilities

Buying

Published

Language in which you want to receive the document.

Scope

This document specifies the design and use requirements, the test methods and the scales of classification of the environmental performance when using a domestic swimming pool.
This document is applicable to outdoor pools, as defined in EN 16582 (all parts), intended to be permanently installed, and shall be read jointly with the latter.
This document allows the evaluation of the environmental performance efficiency of the use of domestic swimming pools.
NOTE 1 This document only covers the operational phase of the basin. All the other stages of the product life cycle, such as the extraction of resources, the acquisition of raw materials, production, distribution, use and end-of- life processing, including final disposal, are not covered by this document.
This document does not apply to:
— domestic indoor swimming pools and their specific functions of buildings housing such as air treatment or the lighting or insulation of the buildings, etc.;
— domestic spas covered by EN 17125, or their specific equipment;
— swimming pools for public use covered by EN 15288-1, or their specific equipment;
— spas for public use, or their specific equipment;
— mini-pools covered by EN 16927, or their specific equipment;
— paddling pools covered by EN 71-1 and EN 71-8, or their specific equipment;
— non-permanently installed pools covered by EN 16582 (all parts).
NOTE 2 This document does not cover non-permanently installed pools, due to the fact that absolute majority of these types of pools are not equipped with heating, and are operated and used only for relatively short time periods (range of 3-4 months). Moreover, the power consumption of pumps used are usually low (range of less than 1 kWh per day).
Nevertheless, to ensure a future objective comparison also with these types of pools and other permanently installed pools, a calculation method for non-permanently installed pools will be established and considered in the next revision of this document.
This document also does not apply to the following equipment:
— personal hygiene devices, such as showers or footbaths, or their specific equipment;
— devices for water features, such as water play equipment or fountains, or their corresponding specific equipment (dedicated pumps, etc.).

Life cycle

NOW

PUBLISHED
EN 17645:2022
60.60 Standard published
Aug 24, 2022