EN 14793:2017

Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method

Publication date:   Mar 16, 2017

General information

90.93 Standard confirmed   Sep 15, 2022

CEN

CEN/TC 264 Air quality

European Norm

13.040.40   Stationary source emissions

Buying

  Published

PDF - €50.63

  Bulgarian   English  



Buy

Scope

This European Standard specifies a procedure to demonstrate the equivalence of an alternative method (AM) with the reference method (RM) or the standard reference method (SRM), both implemented to determine the same measurand.
In particular, this European Standard provides the statistical tools and different criteria to evaluate the alternative method. This does not release the body performing the equivalence testing from bearing technical and analytical judgement on the evaluation of the different criteria.
Three steps are required for demonstration of equivalence:
 description of the alternative method and setting of the field of application (measurement range and type of gas matrix);
 determination of the performance characteristics of the alternative method and calculation of the expanded uncertainty where appropriate and check of compliance with the maximum expanded uncertainty allowed for the reference method;
 check of repeatability and lack of systematic deviation of the alternative method in the field or on a recognized test bench in comparison with the reference method for the type of matrix defined in the field of equivalence.
This European Standard requires that a reference method has been defined and validated.
This European Standard only considers the case of linear quantitative methods.
This European Standard has been drawn up for laboratories working in air quality measurements and consequently an example taken from this sector are presented in Annex A.

Life cycle

PREVIOUSLY

WITHDRAWN
CEN/TS 14793:2005

NOW

PUBLISHED
EN 14793:2017
90.93 Standard confirmed
Sep 15, 2022