EN 14035-8:2004

Fireworks - Part 8: Bengal sticks - Specification and test methods

Publication date:   Sep 25, 2006

Scope

This document specifies requirements for the construction, performance, primary packaging and labelling of Bengal sticks and the corresponding test methods. It is applicable to fireworks which are classified as Bengal sticks in categories 1 and 2 in EN 14035-2 and which are contained in a primary pack.
It is not applicable to Bengal sticks containing pyrotechnic composition that includes any of the following substances:
- arsenic or arsenic compounds;
- mixtures containing a mass fraction of chlorates greater than 80 %;
- mixtures of chlorates with metals;
- mixtures of chlorates with red phosphorus;
- mixtures of chlorates with potassium hexacyanoferrate(II);
- mixtures of chlorates with sulfur;
- mixtures of chlorates with sulfides;
- lead or lead compounds;
- mercury compounds;
- white phosphorus;
- picrates or picric acid;
- potassium chlorate with a mass fraction of bromates greater than 0,15 %;
- sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;
- zirconium with a particle size of less than 40 mm.
NOTE In EN 14035-2, Bengal sticks are classified as follows:
- brief description: wooden stick partially coated (along one end) with slow-burning pyrotechnic composition and designed to be held in the hand;
- principal effects: emission of coloured flames and sparks.
Schemes for type testing of Bengal sticks and batch testing of Bengal sticks are specified in annex A and annex B respectively.
Requirements for construction, performance, labelling, sampling and testing of Bengal sticks