CWA 16374-38:2014

Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 38: XFS MIB Device Specific Definitions – Camera Device Class MIB 3.20

Scope

This document provides the device specific MIB definition (Management Information Base) variables for the xfsCAM sub-tree version one, as foreseen by the XFS MIB Architecture and SNMP Extensions Programmer’s Reference document. All the attributes in all the MIBs are Mandatory. In the case where a vendor’s device does not support an attribute then a request for this unsupported attribute should return NULL.

The xfsCAM version one sub-tree is identified by:

xfsMIBRoot
• xfsManagedService (2)
• xfsCAM (10)
• xfsCAMV1 (1)

The xfsCAMV1 sub-tree contains the following variables:

* xfsCAMInstances(1) is the number of managed services for the CAM class installed on the XFS subsystem. It is a 32 bit numerical field.
* xfsCAMStatusTable(2) identifies the table for the CAM variables.
* xfsCAMSubDeviceTable(3) not applicable to the CAM device.
* xfsCAMErrorTable(4) identifies the table for the CAM error counters.
* xfsCAMResetTable(5) identifies the table for the CAM reset variable.
* xfsCAMResetDeviceTable(6) identifies the table for the CAM reset device variables.
* xfsCAMCapabilitiesTable(7) identifies the table for the CAM capabilities variables.

The XFS MIB Architecture and SNMP Extensions Programmer’s Reference document provides an overview of the MIB structure. The following picture shows the structure of the xfsCAMV1 sub-tree.