CWA 15748-38:2011

Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 38: XFS MIB Device Specific Definitions - Camera Device Class MIB 3.10

Scope

This document provides the device specific MIB definition (Management Information Base) variables for the xfsCAM sub-tree version one, as foreseen by the XFS MIB Architecture and SNMP Extensions Programmer’s Reference document. All the attributes in all the MIBs are Mandatory. In the case where a vendor’s device does not support an attribute then a request for this unsupported attribute should return NULL.

The xfsCAM version one sub-tree is identified by:

xfsMIBRoot
- xfsManagedService (2)
- xfsCAM (10)
- xfsCAMV1 (1)

The xfsCAMV1 sub-tree contains the following variables:

* xfsCAMInstances(1) is the number of managed services for the CAM class installed on the XFS subsystem. It is a 32 bit numerical field.
* xfsCAMStatusTable(2) identifies the table for the CAM variables.
* xfsCAMSubDeviceTable(3) not applicable to the CAM device.
* xfsCAMErrorTable(4) identifies the table for the CAM error counters.
* xfsCAMResetTable(5) identifies the table for the CAM reset variable.
* xfsCAMResetDeviceTable(6) identifies the table for the CAM reset device variables.
* xfsCAMCapabilitiesTable(7) identifies the table for the CAM capabilities variables.
The XFS MIB Architecture and SNMP Extensions Programmer’s Reference document provides an overview of the MIB structure.