cen:proj:79348

Thermal Insulation Products —Preparatory procedures in order to test according to EN 16516:2017+A1:2020 cen:proj:79348

Scope

This document specifies the preparatory procedures for thermal insulation materials to test according to EN 16516:2017+A1:2020.
This document is applicable to the following materials and products:
— Factory made mineral wool (MW) products;
— Factory made products of expanded polystyrene (EPS);
— Factory made extruded polystyrene foam (XPS) products;
— Factory made rigid polyurethane foam (PU) products;
— Factory made phenolic foam (PF) products;
— Factory made cellular glass (CG) products;
— Factory made wood wool (WW) products;
— Factory made expanded perlite board (EPB) products;
— Factory made products of expanded cork (ICB);
— Factory made wood fibre (WF) products;
— In-situ formed expanded clay lightweight aggregate products (LWA);
— In-situ formed loose-fill mineral wool (MW) products;
— In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products;
— In-situ thermal insulation formed from expanded perlite (EP) products;
— In-situ thermal insulation formed from exfoliated vermiculite (EV) products;
— In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products;
— Expanded polystyrene blocks;
— In-situ formed loose fill cellulose (LFCI) products;
— Bound EPS ballastings;
— Insitu formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads.