ISO 13168:2023

Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting ISO 13168:2023

General information

60.60 Standard published   Nov 27, 2023

ISO

ISO/TC 147/SC 3 Radioactivity measurements

International Standard

13.060.60   Examination of physical properties of water | 13.280   Radiation protection

Scope

This document specifies a method for the simultaneous measurement of 3H and 14C in water samples by liquid scintillation counting of a source obtained by mixing the water sample with a hydrophilic scintillation cocktail.
The method presented in this document is considered a screening method because of the potential presence of interfering radionuclides in the test sample. However, if the sample is known to be free of interfering radionuclides then 3H and 14C can be measured quantitatively.
The method can be used for any type of environmental study or monitoring.
This method is applicable to test samples of supply/drinking water, rainwater, surface and ground water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater having an activity concentration ranging from 5 Bq∙l-1 to 106 Bq∙l-1 (upper limit of the liquid scintillation counters for direct counting). For higher activity concentrations, the sample can be diluted to obtain a test sample within this range.

Life cycle

PREVIOUSLY

WITHDRAWN
ISO 13168:2015

NOW

PUBLISHED
ISO 13168:2023
60.60 Standard published
Nov 27, 2023