EN 12285-4:2023

Workshop fabricated steel tanks - Part 4: Vertical cylindrical single skin and double skin tanks for the aboveground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings EN 12285-4:2023

Publication date:   Aug 24, 2023

General information

60.55 Ratification completed (DOR)   Nov 20, 2023

CEN

CEN/TC 265 Metallic tanks for the storage of liquids

European Norm

13.300   Protection against dangerous goods | 23.020.10   Stationary containers and tanks

Buying

Draft

Language in which you want to receive the document.

Scope

This document specifies the requirements for metallic shop fabricated cylindrical vertical steel tanks, single and double skin for the aboveground storage of water polluting liquids (both flammable and non-flammable) within the following limits:
— from Ø 1250 mm up to Ø 4 000 mm inner tank nominal diameter, and
— up to maximum overall shell length of 6 times the nominal inner tank diameter (or max 14 m shell lenght Lz), and
— tank possible to be divided from 1 to 5 compartments,
— for liquids with maximum density of up to 1,9 kg/l, and
— with an operating pressure (P0) of maximum 50kPa (0,5 bar (g)) and minimum – 5 kPa (- 50 mbar (g)), and
— where double skin tanks with vacuum leak detection system are used the kinematic viscosity of the stored media shall not exceed 5 × 10−3 m2/s.
This document is applicable for normal ambient temperature conditions (−40 °C to + 50 °C). Where temperatures are outside this range, additional requirements need to be taken into account.
This document is not applicable to tanks used for storage and/or supply of fuel/gas for building heating/cooling systems, and of hot or cold water not intended for human consumption, nor to loads and special measures necessary in areas subject to risk of earthquakes.
This document is not applicable for the storage of liquids having dangerous goods classes listed in Table 1 because of the special dangers involved.
Table 1 - List of dangerous goods which are not covered by this document
UN-classification Type of dangerous goods
Class 1 Explosives
Class 4.2 Substances liable to spontaneous combustion
Class 4.3 Substances which in contact with water emit flammable gases
Class 5.2 Organic peroxides
Class 6.2 Infectious substances
Class 7 Radioactive substances, hydrocyanic or hydrocyanic solvent liquids, metal carbons, hydrofluoric acid, bromide liquids
NOTE The classifications referred to are those adopted by the United Nations Committee of Experts on the Transport of Dangerous Goods (not to be interpreted as tank classes described in 6.2).

Life cycle

NOW

IN_DEVELOPMENT
EN 12285-4:2023
60.55 Ratification completed (DOR)
Nov 20, 2023