DISCLAMER: This is an informative page, providing added value information on standards. Information may evolve and change subject to the publication of other legislative texts. Genorma.com informs their users that users are responsible for deciding the version of the standard that is applicable to their products, and not Genorma.com. As a consequence, Genorma.com users are encouraged to check the legal text accessible through the following link: https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX%3A32019D1616 and related pieces of legislation.
Genorma.com note: See at the end of this page for more information on relevant standards
Date of document: 27/09/2019; Date of adoptionDate of effect: 30/09/2019; Entry into force Date pub. See Art 3Date of end of validity: No end date
Classifications
EUROVOC descriptor:
marketing standard; technical specification; European standard; harmonisation of standards; product safety; safety standard; technical standard; pressure equipment; European Committee for Standardisation;
Subject matter:
Internal market - Principles
Directory code:
13.30.99.00 Industrial policy and internal market / Internal market: approximation of laws / Other sectors for approximation of laws
CELEX Document 32019D1616; Amended by 32020D0542; Amended by 32021D0157; Amended by 32021D1801; Amended by 32021D2272.
30.9.2019 | EN | Official Journal of the European Union | L 250/95 |
COMMISSION IMPLEMENTING DECISION (EU) 2019/1616 of 27 September 2019
on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,
Whereas:
(1) In accordance with Article 12 of Directive 2014/68/EU of the European Parliament and of the Council (2), pressure equipment or assemblies referred to in Article 4(1) and (2) of that Directive which are in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the essential safety requirements covered by those standards or parts thereof referred to in Annex I to that Directive.
(2) By letter M/071 of 1 August 1994 the Commission made a request to the European Committee for Standardization (CEN) for drawing up, in relation to the pressure equipment, the product related standards and the standards of a horizontal nature in support of Directive 97/23/EC of the European Parliament and of the Council (3). That Directive was replaced by Directive 2014/68/EU without changing the essential safety requirements referred to in Annex I to Directive 97/23/EC.
(3) On the basis of the request M/071 CEN drafted new harmonised standards EN ISO 4126-2:2019 for safety devices for protection against excessive pressure, EN ISO 15494:2018 for plastics piping systems for industrial applications and EN ISO 21028-2:2018 for cryogenic vessels. Standard EN ISO 21028-2:2018 is a new standard replacing EN 1252-2:2001. In order to reflect the state of the art, CEN amended and revised some of the existing standards. Specifically, CEN amended standards EN 13445-2:2014, EN 13445-3:2014, EN 13445-5:2014 and EN 13445-6:2014 for unfired pressure vessels, and standards EN 13480-2:2017 and EN 13480-5:2017 for metallic industrial piping. CEN also revised standards EN 1562:2012 and EN 1563:2011 for cast iron, standards EN 12516-1:2014 and EN 12516-4:2014 for industrial valves and standard EN 13136:2013 for refrigerating systems and heat pumps.
(4) The Commission together with the CEN has assessed whether the standards on the pressure equipment as drafted, amended or revised by CEN comply with the request M/071.
(5) The standards on the pressure equipment as drafted, amended or revised by CEN satisfy the requirements which they aim to cover and which are referred to in Annex I to Directive 2014/68/EU. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.
(6) References of amended or revised versions of standards are to be published for the standards EN 13445-2:2014, EN 13445-3:2014, EN 13445-5:2014, EN 13445-6:2014, EN 13480-2:2017, EN 13480-5:2017, EN 1562:2012, EN 1563:2011, EN 12516-1:2014, EN 12516-4:2014 and EN 13136:2013. Standard EN 1252-2:2001 is to be replaced by a new standard. It is therefore necessary to withdraw from the Official Journal of the European Union (4) references of the standards EN 13445-2:2014, EN 13445-2:2014/A1:2016, EN 13445-2:2014/A2:2018, EN 13445-3:2014, EN 13445-3:2014/A1:2015, EN 13445-3:2014/A2:2016, EN 13445-3:2014/A3:2017, EN 13445-3:2014/A4:2018, EN 13445-5:2014, EN 13445-6:2014, EN 13480-2:2017, EN 13480-5:2017, EN 1252-2:2001, EN 1562:2012, EN 1563:2011, EN 12516-1:2014, EN 12516-4:2014 and EN 13136:2013. In order to provide the manufacturers with sufficient time to adapt their products to the new standards for cryogenic vessels and the revised standards for cast iron, industrial valves and refrigeration systems and heat pumps, it is necessary to defer the withdrawal of the references of those standards.
(7) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the day of its publication,
HAS ADOPTED THIS DECISION:
The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 27 September 2019.
For the Commission
The President
Jean-Claude JUNCKER
(1) OJ L 316, 14.11.2012, p. 12.
(2) Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (OJ L 189, 27.6.2014, p. 164).
(3) Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment (OJ L 181, 9.7.1997, p. 1).
(4) OJ C 326, 14.9.2018, p. 94.
No | Reference of the standard | Title of the standard
| EN 1562:2019 | Founding — Malleable cast irons
| EN 1563:2018 | Founding — Spheroidal graphite cast irons
| EN ISO 4126-2:2019 | Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices (ISO 4126-2:2018)
| EN 12516-1:2014+A1:2018 | Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells
| EN 12516-4:2014+A1:2018 | Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
| EN 13136:2013+A1:2018 | Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation
| EN 13445-2:2014 | Unfired pressure vessels — Part 2: Materials
| EN 13445-2:2014/A1:2016 |
| EN 13445-2:2014/A2:2018 |
| EN 13445-2:2014/A3:2018 |
| EN 13445-3:2014 | Unfired pressure vessels — Part 3: Design
| EN 13445-3:2014/A1:2015 |
| EN 13445-3:2014/A2:2016 |
| EN 13445-3:2014/A3:2017 |
| EN 13445-3:2014/A4:2018 |
| EN 13445-3:2014/A5:2018 |
| EN 13445-3:2014/A6:2019 |
| EN 13445-5:2014 | Unfired pressure vessels — Part 5: Inspection and testing
| EN 13445-5:2014/A1:2018 |
| EN 13445-6:2014 | Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
| EN 13445-6:2014/A2:2018 |
| EN 13480-2:2017 | Metallic industrial piping — Part 2: Materials
| EN 13480-2:2017/A1:2018 |
| EN 13480-2:2017/A2:2018 |
| EN 13480-2:2017/A3:2018 |
| EN 13480-5:2017 | Metallic industrial piping — Part 5: Inspection and testing
| EN 13480-5:2017/A1:2019 |
| EN ISO 15494:2018 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system (ISO 15494:2015)
| EN ISO 21028-2:2018 | Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between – 80 degrees C and – 20 degrees C (ISO 21028-2:2018)
No | Reference of the standard | Date of withdrawal
| EN 13445-2:2014 | Unfired pressure vessels — Part 2: Materials | 30 September 2019
| EN 13445-2:2014/A1:2016 | | 30 September 2019
| EN 13445-2:2014/A2:2018 | | 30 September 2019
| EN 13445-3:2014 | Unfired pressure vessels — Part 3: Design | 30 September 2019
| EN 13445-3:2014/A1:2015 | 30 September 2019
| EN 13445-3:2014/A2:2016 | 30 September 2019
| EN 13445-3:2014/A3:2017 | 30 September 2019
| EN 13445-3:2014/A4:2018 | 30 September 2019
| EN 13445-5:2014 | Unfired pressure vessels — Part 5: Inspection and testing | 30 September 2019
| EN 13445-6:2014 | Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron | 30 September 2019
| EN 13480-2:2017 | Metallic industrial piping — Part 2: Materials | 30 September 2019
| EN 13480-5:2017 | Metallic industrial piping — Part 5: Inspection and testing | 30 September 2019
| EN 1252-2:2001 | Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C | 30 March 2020
| EN 1562:2012 | Founding — Malleable cast irons | 30 March 2020
| EN 1563:2011 | Founding — Spheroidal graphite cast irons | 30 March 2020
| EN 12516-1:2014 | Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells | 30 March 2020
| EN 12516-4:2014 | Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel | 30 March 2020
| EN 13136:2013 | Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation | 30 March 2020
Note: Click below to obtain the standards you need or relevant information on them
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
60.60 Standard published
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
90.00 Start of review/2 Year Review Enquiry
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
99.60 Withdrawal effective
Unfired pressure vessels - Part 5: Inspection and testing
99.60 Withdrawal effective
Unfired pressure vessels - Part 5: Inspection and testing
99.60 Withdrawal effective
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
99.60 Withdrawal effective
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
99.60 Withdrawal effective
Metallic industrial piping - Part 5: Inspection and testing
99.60 Withdrawal effective
Metallic industrial piping - Part 5: Inspection and testing
99.60 Withdrawal effective
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
60.60 Standard published
Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
60.60 Standard published
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2018)
60.60 Standard published