0

Standards on Electric cables and conductors

(1 sub product groups)




Standards on Power distribution cables

Testing methods

Conductors of insulated cables - Electrical resistance - Dimensional limits of circular cables  

Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - General requirements  

Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Testing Methods  

Single core cables with crosslinked silicone rubber insulation - Particular requirements  

Flexible cables - Particular requirements  

Cables for arc welding - Particular requirements  

Heat resistant cables for general applications for conductors - temperature up to 110⁰C - Particular requirements  

Cables with crosslinked elastomeric insulation for decorative chains - Particular requirements  

Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke - Particular requirements including UNE 21027-9  

Flexible cables with crosslinked elastomeric insulation - Particular requirements  

Cables with crosslinked EVA insulation - Particular requirements  

Heat Resistant flexibles cables with crosslinked EPR insulation - Particular requirements  

Flexible cables with crosslinked reticulated composition and with low emission of smoke and corrosive gases - Particular requirements  

Flexible cables with halogen-free crosslinked insulation, and low emission of smoke - Particular requirements  

High flexibility braided cables with crosslinked elastomeric insulation - Particular requirements  

Multicore cables with crosslinked silicone rubber insulation - Particular requirements  

Water resistant cables with polychloropreno, or equivalent synthetic crosslinked elastomeric insulation - Particular requirements  

Cables with thermoplastic insulation of nominal voltage Uo/U up to and including 450/750 V - General requirements  

Cables with thermoplastic insulation of nominal voltage Uo/U up to and including 450/750 V - Testing method  

Single core non-sheathed cables with thermoplastic PVC insulation- Particular requirements  

Sheathed cables for fixed wiring - Particular requirements  

Flexible cables - Particular requirements  

Single core non-sheathed for conductor temperature of 90°C - Particular requirements  

Cables without cover for decorative chains - Particular requirements  

Single core non-sheathed cable for installation at low temperatures - Particular requirements  

Extensibles cables - Particular requirements  

Cables for luminaires - Particular requirements  

Heat resistant flexible cables - Particular requirements  

Oil resistant control cables with thermoplastic PVC insulation - Particular requirements  

Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke - Particular requirements  

Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke - Particular requirements  

Cables - Electrical test methods for low voltage energy cables  

Cables - Non-electrical test methods for low voltage energy cables  

Flexible cables for elevators and service lifts - Particular requirements  

Flexibles cables for moveable services isolated with rubber of ethylene-propylene and covering reinforced of polychloroprene  

Power cables for submergible pumps - Particular requirements - UNE 21166  

Cables and their accessories - Impulse test  

Insulating materials and cover of electrical cables - Measurement of insulation thickness  

Insulating materials and cover of electrical cables - Measurement of thickness of non-metallic cover  

Insulating materials and cover of electrical cables - Measurement of the external dimensions  

Insulating materials and cover of electrical cables - Mechanical properties of insulating and sheathing compounds  

Insulating materials and cover of electrical cables - Thermal ageing methods: - Ageing in an air oven + Ageing in an air bomb  

Insulating materials and cover of electrical cables - Ageing procedures and evaluation of test results  

Insulating materials and cover of electrical cables - Water absorption test  

Insulating materials and cover of electrical cables - Shrinkage test for insulations  

Insulating materials and cover of electrical cables - Shrinkage test for sheaths  

Insulating materials and cover of electrical cables - Methods for determining the density  

Insulating materials and cover of electrical cables - Bending test at low temperature  

Insulating materials and cover of electrical cables - Elongation at low temperature  

Insulating materials and cover of electrical cables - Impact test at low temperature for insulations and sheaths  

Insulation and cover of electrical cables: Elastomeric materials - Ozone resistance test on cross-linked compounds  

Insulation and cover of electrical cables: Elastomeric materials - Mineral oil immersion test for sheaths  

Insulation and cover of electrical cables: Elastomeric materials - Hot set test for cross-linked materials  

Insulation and covers of electrical cables: PVC mixtures - Pressure test at High temperature for insulation and sheaths  

Insulation and covers of electrical cables: PVC mixtures - Test for resistance of insulations and sheaths to cracking (heat shock test)  

Electric cables - Tests of behaviour to fire: Exposing to the flame  

Electric cables - Test of non propagation of fire  

Electric cables - Determination of the amount of halogen acid gas removed and the degree of acidity (corrosivity) on gases evolved during combustion of gases  

Electric cables - Method of test for resistance to fire of unprotected small cables for use in emergency circuits  

Electric cables - Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits  

Electric cables - Heat release and smoke production measurement  

Electric cables - Test on high voltage cables  

Electric cables - Electrical tests, Partial discharge tests  

Electric cables - Additional methods  

Electric cables - Industrial cables of rated voltage 0,6/1 kV. Part 1: PVC insulated and sheathed cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1kV. Part 2: XLPE insulated and PVC Sheathed cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1kV Part 3: EPR insulated and PVC sheated cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1 kV Part 4: XLPE insulated and polyolefin sheathed cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1 kV Part 5: EPR insulated and polyolefin sheathed cables - Particular requirements  

Electric cables - Distribution cables of rated voltage 0,6/1 kV - General requirements  

Electric cables - Distribution cables of rated voltage 0,6/1 kV. Part 5: XLPE insulated cables unarmoured. Section N: PVC sheathed cables without concentric conductor (Type 5N) - Particular requirements  

Electric cables - Distribution cables of rated voltage 0,6/1 kV. Part 5: XLPE insulated cables unarmoured. Section X: Polyolefin sheathed cables without concentric conductor (Type 5X-1) - Particular requirements  

Electric cables - Cables with intrinsic resistance to fire and intended for use in emergency circuits - Particular requirements  

Electric cables - Cables of rated voltages up to and including 450/750 V and having low emission smoke and corrosive thermoplastic insulation compound - Particular requirements  

Electric cables - Cables for signs and luminous- discharge-tube installations - Particular requirements  

Electric cables - Bundle assembled cores of rated voltage 0,6/1 kV for overhead distribution, service and similar uses - Index  

Electric cables - Bundle assembled cores of rated voltage 0,6/1 kV for overhead distribution, service and similar uses - Aluminum conductors - Particular requirements  

Electric cables - Bundle assembled cores of rated voltage 0,6/1 kV for overhead distribution, service and similar uses - Copper conductors - Particular requirements  

Electric cables - Cables for earthing and short- circuiting equipment - Particular requirements  

Electric cables - Insulated cables with PVC for audio equipment - Particular requirements  

Electric cables - Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV - Particular requirements  

Electric cables - Distribution cables with extruded insulation and aluminium tape screen for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - Particular requirements  

Electric cables - Single-core cables and joined single- core cables, with crosslilnked insulation of HEPR. Section E: Cables with polyolefine compound sheath (types 9E-1, 9E-3, 9E-4 and 9E-5) - Particular requirements  

Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - HPTR insulated single core cables and single core pre-assembled cables - Cables with polyolefine compound sheath (type 1, type 2 and type 3)  

Electric cables - XLPE Insulated Single-core and 3 core cables, and single core pre- assembled cables. Section E: Cables with polyolefine compound sheath (types 10E-1, 10E-3, 10E-4 and 10E- 5) - Particular requirements  

Electric cables - Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - HPTE insulated single core cables and single core pre-assembled cables. Cables with polyolefine compound sheath (type 1, 2 and 3)  

Electric cables - Tests on extruded oversheaths with a special protective function - Dielectric test on extruded oversheaths  

Electric cables - Hard copper plain stranded conductors for overhead electrical lines - Particular requirements - UNE 207015  

Electric cables - Conductors for overhead lines. Round wire concentric lay stranded conductors - Particular requirements  

Electric cables - Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires - Particular requirements  

Electric cables - Conductors for overhead lines - Zinc coated steel wires - Particular requirements - EN 50189  

Electric cables - Hard-drawn aluminium wire for overhead line conductors - Particular requirements  

Electric cables - Aluminium-clad steel wires for electrical purposes - Particular requirements  

Electric cables - Steel wire and wire products - Non- ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings - Particular requirements  

Electric cables - Electric cables for photovoltaic systems - Particular requirements  

Electric cables - Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC - Particular requirements  

Electric cables - Communication cables - Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable  

Electric cables - Charging cables for electric vehicles - Particular requirements  

Electric cables - Charging cables for electric vehicles for rated voltages up to and including 0,6 / 1 kV - Particular requirements  

Electric cables - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV. Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V - Particular requirements  

Electric cables - Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV. Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system - Particular requirements  

Electric cables - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Particular requirements  

Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords) - Particular requirements  

Cable accessories - Test of clamping  

Electrical accessories - Cord sets and interconnection cord sets - Type test (except tests of electromagnetic compatibility)  

European and international Standards and tests covering Electric cables, insulated cables, cords, conductors:

  • 31300000-9 - Insulated wire and cable; Fils et câbles isolés; Isolierte Elektrokabel, -leitungen und -drähte; Hilos y cables aislados
  • 31310000-2 - Mains; Canalisations; Verteilungsnetze; Redes de distribución
  • 31320000-5 - Power distribution cables; Câbles de distribution électrique; Stromverteilerkabel; Cables de distribución eléctrica
  • 31330000-8 - Coaxial cable; Câbles coaxiaux; Koaxialkabel; Cable coaxial
  • 31340000-1 - Insulated cable accessories; Accessoires de câble, isolés; Kabelzubehör, isoliert; Accesorios de cables, aislados
  • 31350000-4 - Electric conductors for data and control purposes; Conducteurs électriques pour données et contrôle; Steuerkabel; Conductores eléctricos para datos y control