0

Standards on Electric cables and conductors

(1 sub product groups)




Standards on Power distribution cables

Testing methods

Conductors of insulated cables - Electrical resistance - Dimensional limits of circular cables  

Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - General requirements  

Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Testing Methods  

Single core cables with crosslinked silicone rubber insulation - Particular requirements  

Flexible cables - Particular requirements  

Cables for arc welding - Particular requirements  

Heat resistant cables for general applications for conductors - temperature up to 110⁰C - Particular requirements  

Cables with crosslinked elastomeric insulation for decorative chains - Particular requirements  

Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke - Particular requirements including UNE 21027-9  

Flexible cables with crosslinked elastomeric insulation - Particular requirements  

Cables with crosslinked EVA insulation - Particular requirements  

Heat Resistant flexibles cables with crosslinked EPR insulation - Particular requirements  

Flexible cables with crosslinked reticulated composition and with low emission of smoke and corrosive gases - Particular requirements  

Flexible cables with halogen-free crosslinked insulation, and low emission of smoke - Particular requirements  

High flexibility braided cables with crosslinked elastomeric insulation - Particular requirements  

Multicore cables with crosslinked silicone rubber insulation - Particular requirements  

Water resistant cables with polychloropreno, or equivalent synthetic crosslinked elastomeric insulation - Particular requirements  

Cables with thermoplastic insulation of nominal voltage Uo/U up to and including 450/750 V - General requirements  

Cables with thermoplastic insulation of nominal voltage Uo/U up to and including 450/750 V - Testing method  

Single core non-sheathed cables with thermoplastic PVC insulation- Particular requirements  

Sheathed cables for fixed wiring - Particular requirements  

Flexible cables - Particular requirements  

Single core non-sheathed for conductor temperature of 90°C - Particular requirements  

Cables without cover for decorative chains - Particular requirements  

Single core non-sheathed cable for installation at low temperatures - Particular requirements  

Extensibles cables - Particular requirements  

Cables for luminaires - Particular requirements  

Heat resistant flexible cables - Particular requirements  

Oil resistant control cables with thermoplastic PVC insulation - Particular requirements  

Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke - Particular requirements  

Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke - Particular requirements  

Cables - Electrical test methods for low voltage energy cables  

Cables - Non-electrical test methods for low voltage energy cables  

Flexible cables for elevators and service lifts - Particular requirements  

Flexibles cables for moveable services isolated with rubber of ethylene-propylene and covering reinforced of polychloroprene  

Power cables for submergible pumps - Particular requirements - UNE 21166  

Cables and their accessories - Impulse test  

Insulating materials and cover of electrical cables - Measurement of insulation thickness  

Insulating materials and cover of electrical cables - Measurement of thickness of non-metallic cover  

Insulating materials and cover of electrical cables - Measurement of the external dimensions  

Insulating materials and cover of electrical cables - Mechanical properties of insulating and sheathing compounds  

Insulating materials and cover of electrical cables - Thermal ageing methods: - Ageing in an air oven + Ageing in an air bomb  

Insulating materials and cover of electrical cables - Ageing procedures and evaluation of test results  

Insulating materials and cover of electrical cables - Water absorption test  

Insulating materials and cover of electrical cables - Shrinkage test for insulations  

Insulating materials and cover of electrical cables - Shrinkage test for sheaths  

Insulating materials and cover of electrical cables - Methods for determining the density  

Insulating materials and cover of electrical cables - Bending test at low temperature  

Insulating materials and cover of electrical cables - Elongation at low temperature  

Insulating materials and cover of electrical cables - Impact test at low temperature for insulations and sheaths  

Insulation and cover of electrical cables: Elastomeric materials - Ozone resistance test on cross-linked compounds  

Insulation and cover of electrical cables: Elastomeric materials - Mineral oil immersion test for sheaths  

Insulation and cover of electrical cables: Elastomeric materials - Hot set test for cross-linked materials  

Insulation and covers of electrical cables: PVC mixtures - Pressure test at High temperature for insulation and sheaths  

Insulation and covers of electrical cables: PVC mixtures - Test for resistance of insulations and sheaths to cracking (heat shock test)  

Electric cables - Tests of behaviour to fire: Exposing to the flame  

Electric cables - Test of non propagation of fire  

Electric cables - Determination of the amount of halogen acid gas removed and the degree of acidity (corrosivity) on gases evolved during combustion of gases  

Electric cables - Method of test for resistance to fire of unprotected small cables for use in emergency circuits  

Electric cables - Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits  

Electric cables - Heat release and smoke production measurement  

Electric cables - Test on high voltage cables  

Electric cables - Electrical tests, Partial discharge tests  

Electric cables - Additional methods  

Electric cables - Industrial cables of rated voltage 0,6/1 kV. Part 1: PVC insulated and sheathed cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1kV. Part 2: XLPE insulated and PVC Sheathed cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1kV Part 3: EPR insulated and PVC sheated cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1 kV Part 4: XLPE insulated and polyolefin sheathed cables - Particular requirements  

Electric cables - Electrical cables for industrial use of voltage 0,6/1 kV Part 5: EPR insulated and polyolefin sheathed cables - Particular requirements  

Electric cables - Distribution cables of rated voltage 0,6/1 kV - General requirements  

Electric cables - Distribution cables of rated voltage 0,6/1 kV. Part 5: XLPE insulated cables unarmoured. Section N: PVC sheathed cables without concentric conductor (Type 5N) - Particular requirements  

Electric cables - Distribution cables of rated voltage 0,6/1 kV. Part 5: XLPE insulated cables unarmoured. Section X: Polyolefin sheathed cables without concentric conductor (Type 5X-1) - Particular requirements  

Electric cables - Cables with intrinsic resistance to fire and intended for use in emergency circuits - Particular requirements  

Electric cables - Cables of rated voltages up to and including 450/750 V and having low emission smoke and corrosive thermoplastic insulation compound - Particular requirements  

Electric cables - Cables for signs and luminous- discharge-tube installations - Particular requirements  

Electric cables - Bundle assembled cores of rated voltage 0,6/1 kV for overhead distribution, service and similar uses - Index  

Electric cables - Bundle assembled cores of rated voltage 0,6/1 kV for overhead distribution, service and similar uses - Aluminum conductors - Particular requirements  

Electric cables - Bundle assembled cores of rated voltage 0,6/1 kV for overhead distribution, service and similar uses - Copper conductors - Particular requirements  

Electric cables - Cables for earthing and short- circuiting equipment - Particular requirements  

Electric cables - Insulated cables with PVC for audio equipment - Particular requirements  

Electric cables - Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV - Particular requirements  

Electric cables - Distribution cables with extruded insulation and aluminium tape screen for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - Particular requirements  

Electric cables - Single-core cables and joined single- core cables, with crosslilnked insulation of HEPR. Section E: Cables with polyolefine compound sheath (types 9E-1, 9E-3, 9E-4 and 9E-5) - Particular requirements  

Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - HPTR insulated single core cables and single core pre-assembled cables - Cables with polyolefine compound sheath (type 1, type 2 and type 3)  

Electric cables - XLPE Insulated Single-core and 3 core cables, and single core pre- assembled cables. Section E: Cables with polyolefine compound sheath (types 10E-1, 10E-3, 10E-4 and 10E- 5) - Particular requirements  

Electric cables - Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - HPTE insulated single core cables and single core pre-assembled cables. Cables with polyolefine compound sheath (type 1, 2 and 3)  

Electric cables - Tests on extruded oversheaths with a special protective function - Dielectric test on extruded oversheaths  

Electric cables - Hard copper plain stranded conductors for overhead electrical lines - Particular requirements - UNE 207015  

Electric cables - Conductors for overhead lines. Round wire concentric lay stranded conductors - Particular requirements  

Electric cables - Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires - Particular requirements  

Electric cables - Conductors for overhead lines - Zinc coated steel wires - Particular requirements - EN 50189  

Electric cables - Hard-drawn aluminium wire for overhead line conductors - Particular requirements  

Electric cables - Aluminium-clad steel wires for electrical purposes - Particular requirements  

Electric cables - Steel wire and wire products - Non- ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings - Particular requirements  

Electric cables - Electric cables for photovoltaic systems - Particular requirements  

Electric cables - Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC - Particular requirements  

Electric cables - Communication cables - Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable  

Electric cables - Charging cables for electric vehicles - Particular requirements  

Electric cables - Charging cables for electric vehicles for rated voltages up to and including 0,6 / 1 kV - Particular requirements  

Electric cables - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV. Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V - Particular requirements  

Electric cables - Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV. Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system - Particular requirements  

Electric cables - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Particular requirements  

Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords) - Particular requirements  

Cable accessories - Test of clamping  

Electrical accessories - Cord sets and interconnection cord sets - Type test (except tests of electromagnetic compatibility)  

European and international Standards and tests covering Electric cables, insulated cables, cords, conductors:

  • 31300000-9 - Insulated wire and cable; Fils et câbles isolés; Isolierte Elektrokabel, -leitungen und -drähte; Hilos y cables aislados
  • 31310000-2 - Mains; Canalisations; Verteilungsnetze; Redes de distribución
  • 31320000-5 - Power distribution cables; Câbles de distribution électrique; Stromverteilerkabel; Cables de distribución eléctrica
  • 31330000-8 - Coaxial cable; Câbles coaxiaux; Koaxialkabel; Cable coaxial
  • 31340000-1 - Insulated cable accessories; Accessoires de câble, isolés; Kabelzubehör, isoliert; Accesorios de cables, aislados
  • 31350000-4 - Electric conductors for data and control purposes; Conducteurs électriques pour données et contrôle; Steuerkabel; Conductores eléctricos para datos y control




Access Genorma App Everywhere

Get fast and easy access to top European and International standards (EN, ISO, IEC) via your mobile phone, tablet or the web.

Google Play App Store Web Version