Waste

European and international Standards and draft standards for waste and waste management. Waste management and recovery are an essential pillar of circular economy and the green deals


Technical committee




Characterization of waste

Characterization of waste - State of the art document - Chromium VI specification in solid matrices

60.60 Standard published

CEN/TC 444

Characterization of waste - Digestion of waste samples using alkali-fusion techniques

60.60 Standard published

CEN/TC 444

Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions

60.60 Standard published

CEN/TC 444

Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques

60.60 Standard published

CEN/TC 444

Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field

60.60 Standard published

CEN/TC 444

Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery

60.60 Standard published

CEN/TC 444

Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan

60.60 Standard published

CEN/TC 444

Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste

60.60 Standard published

CEN/TC 444

Characterization of waste - On-site verification

60.60 Standard published

CEN/TC 444

Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification

60.60 Standard published

CEN/TC 444

Characterization of Waste - State-of-the-art document - Analysis of eluates

60.60 Standard published

CEN/TC 444

Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries

60.60 Standard published

CEN/TC 444

Characterization of waste - Sampling of waste from extractive industries

60.60 Standard published

CEN/TC 444

Characterization of waste - Overall guidance document for characterization of waste from the extractive industries

60.60 Standard published

CEN/TC 444

Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Determination of gross calorific value and calculation of net calorific value

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Terminology - Part 2: Management related terms and definitions

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Determination of hydrocarbon content by gravimetry

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)

90.20 Standard under periodical review

CEN/TC 444

Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods

90.60 Close of review

CEN/TC 444

Characterization of waste - Preparation of waste samples for ecotoxicity tests

60.60 Standard published

CEN/TC 444

Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan

90.60 Close of review

CEN/TC 444

Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Preparation of test portions from the laboratory sample

90.93 Standard confirmed

CEN/TC 444

Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste

60.60 Standard published

CEN/TC 444

Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments

90.93 Standard confirmed

CEN/TC 444

Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report

90.93 Standard confirmed

CEN/TC 444



Waste management

Waste management - Access control to collection containers - Identification and authorization

60.60 Standard published

CEN/TC 183



Waste classification

Footwear manufacturing wastes - Waste classification and management

90.60 Close of review

CEN/TC 309



Landfill

Characterization of sludges - Good practice for landfilling of sludges and sludge treatment residues

60.60 Standard published

CEN/TC 308

Waste - Test methods for the determination of the monolithic status of waste to be landfilled

90.60 Close of review

CEN/TC 444

Geosynthetics - Screening test method for determining chemical resistance for landfill applications

90.93 Standard confirmed

CEN/TC 189

Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors

60.60 Standard published

CEN/TC 151

Earth-moving machinery — Safety — Part 11: Requirements for landfill compactors

60.60 Standard published

ISO/TC 127/SC 2



Characterization of sludges

Characterization of sludges - Good practice for sludge utilisation in agriculture

60.60 Standard published

CEN/TC 308

Characterization of sludges - Good practice for landfilling of sludges and sludge treatment residues

60.60 Standard published

CEN/TC 308

Characterization of sludges - Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantification

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 2: Miniaturised method (Most Probable Number) by inoculation in liquid medium

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 3: Macromethod (Most Probable Number) in liquid medium

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantitative resuscitation of sub-lethally stressed bacteria (to confirm efficacy of log drop treatment procedures)

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 2: Liquid enrichment method in selenite-cystine medium followed by Rapport-Vassiliadis for semi-quantitative Most Probable Number (MPN) determination

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 3: Presence/absence method by liquid enrichment in peptone-novobiocin medium followed by Rapport-Vassiliadis

60.60 Standard published

CEN/TC 308

Characterization of sludges - Protocol for validating methods for physical properties of sludges

60.60 Standard published

CEN/TC 308

Characterization of sludges - Physical consistency - Thixotropic behaviour and piling behaviour

60.60 Standard published

CEN/TC 308

Characterization of sludges - Good practice for sludges drying

60.60 Standard published

CEN/TC 308

Characterization of sludges - Hygienic aspects - Treatments

60.60 Standard published

CEN/TC 308

Characterization of sludges - Protocol for preparing synthetic suspensions

60.60 Standard published

CEN/TC 308

Characterization of sludges - Protocol for preparing synthetic suspensions

60.60 Standard published

CEN/TC 308

Characterization of sludges - Good practice of sludge dewatering

60.60 Standard published

CEN/TC 308

Characterization of sludges - Guideline of good practice for thermal processes

60.60 Standard published

CEN/TC 308

Characterization of sludges - Sludge management in relation to use or disposal

90.93 Standard confirmed

CEN/TC 308

Characterization of sludges - Determination of dry residue and water content

90.93 Standard confirmed

CEN/TC 308

Characterization of sludges - Determination of Kjeldahl nitrogen

90.93 Standard confirmed

CEN/TC 308

Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride

90.20 Standard under periodical review

CEN/TC 308

Characterization of sludges - Determination of total phosphorus

90.93 Standard confirmed

CEN/TC 308

Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility

90.20 Standard under periodical review

CEN/TC 308

Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge

60.60 Standard published

CEN/TC 308

Characterization of sludges - Laboratory chemical conditioning procedure

90.93 Standard confirmed

CEN/TC 308

Characterization of sludges - Determination of calorific value

90.93 Standard confirmed

CEN/TC 308

Characterization of sludges - Physical consistency - Part 1: Determination of flowability - Method by extrusion tube apparatus

90.93 Standard confirmed

CEN/TC 308



Testing of waste

Biotechnology - Large scale process and production - Guidance for the handling, inactivating and testing of waste

90.60 Close of review

CEN/TC 233

Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste

90.60 Close of review

CEN/TC 233



Disposal of waste

Nanotechnologies - Guidelines for the management and disposal of waste from the manufacturing and processing of manufactured nano-objects

90.20 Standard under periodical review

CEN/TC 352



Waste disposal

Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals

60.60 Standard published

CEN/TC 189

Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

60.60 Standard published

CEN/TC 189



Waste to be landfilled

Waste - Test methods for the determination of the monolithic status of waste to be landfilled

90.60 Close of review

CEN/TC 444



Soil and waste discharge

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation

60.60 Standard published

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

60.60 Standard published

CEN/TC 155

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity

60.60 Standard published

CEN/TC 155

Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

90.93 Standard confirmed

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity

90.93 Standard confirmed

CEN/TC 155

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity

60.60 Standard published

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity

90.60 Close of review

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity

90.93 Standard confirmed

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system

60.60 Standard published

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system

60.60 Standard published

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system

60.60 Standard published

CEN/TC 155

Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system

60.60 Standard published

CEN/TC 155

Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system

60.60 Standard published

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system

90.92 Standard to be revised

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system

60.60 Standard published

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system

60.60 Standard published

CEN/TC 155

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system

90.92 Standard to be revised

CEN/TC 155

Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)

60.60 Standard published

CEN/TC 155

Thermoplastics piping systems for soil and waste discharge inside buildings — Test method for airtightness of joints

90.93 Standard confirmed

ISO/TC 138/SC 1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)

60.60 Standard published

ISO/TC 138/SC 1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)

90.92 Standard to be revised

ISO/TC 138/SC 1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polypropylene (PP)

90.93 Standard confirmed

ISO/TC 138/SC 1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Chlorinated poly(vinyl chloride) (PVC-C)

90.93 Standard confirmed

ISO/TC 138/SC 1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene (ABS)

90.93 Standard confirmed

ISO/TC 138/SC 1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polyethylene (PE)

90.93 Standard confirmed

ISO/TC 138/SC 1

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation

90.20 Standard under periodical review

ISO/TC 138/SC 1



Biowaste

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantification

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 2: Miniaturised method (Most Probable Number) by inoculation in liquid medium

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 3: Macromethod (Most Probable Number) in liquid medium

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantitative resuscitation of sub-lethally stressed bacteria (to confirm efficacy of log drop treatment procedures)

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 2: Liquid enrichment method in selenite-cystine medium followed by Rapport-Vassiliadis for semi-quantitative Most Probable Number (MPN) determination

60.60 Standard published

CEN/TC 308

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 3: Presence/absence method by liquid enrichment in peptone-novobiocin medium followed by Rapport-Vassiliadis

60.60 Standard published

CEN/TC 308

Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli

90.93 Standard confirmed

CEN/TC 444

Sludge, treated biowaste and soil - Determination of specific electrical conductivity

90.93 Standard confirmed

CEN/TC 444

Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite

90.93 Standard confirmed

CEN/TC 444

Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS)

90.60 Close of review

CEN/TC 444

Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS)

90.60 Close of review

CEN/TC 444

Sludge, treated biowaste and soil - Determination of linear alkylbenzene sulfonates (LAS) by high-performance liquid chromatography (HPLC) with fluorescence detection (FLD) or mass selective detection (MS)

90.60 Close of review

CEN/TC 444

Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules

90.93 Standard confirmed

CEN/TC 223

Sludge, treated biowaste and soil - Determination of impurities and stones

90.93 Standard confirmed

CEN/TC 223

Soil, treated biowaste, sludge and waste - Digestion with a hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4) or hydrofluoric (HF) acid mixture for subsequent determination of elements

60.60 Standard published

CEN/TC 444

Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content

90.93 Standard confirmed

CEN/TC 444

Soil, waste, treated biowaste and sludge - Determination of loss on ignition

60.60 Standard published

CEN/TC 444

Soil, waste, treated biowaste and sludge - Determination of total organic carbon (TOC) by dry combustion

60.60 Standard published

CEN/TC 444

Soil, treated biowaste and sludge - Determination of adsorbed organically bound halogens (AOX)

60.60 Standard published

CEN/TC 444

Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method

90.93 Standard confirmed

CEN/TC 444

Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen

90.93 Standard confirmed

CEN/TC 444

Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)

60.60 Standard published

CEN/TC 444

Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)

90.20 Standard under periodical review

CEN/TC 444

Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements

90.93 Standard confirmed

CEN/TC 444

Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)

90.20 Standard under periodical review

CEN/TC 444

Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)

90.20 Standard under periodical review

CEN/TC 444

Sludge, treated biowaste and soil - Guidance for sample pretreatment

90.93 Standard confirmed

CEN/TC 444

Soil, treated biowaste and sludge - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)

60.60 Standard published

CEN/TC 444

Soil, sludge, treated biowaste and waste - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)

60.60 Standard published

CEN/TC 444

Soil, treated biowaste and sludge - Determination of pH (ISO 10390:2021)

60.60 Standard published

CEN/TC 444

Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020)

60.60 Standard published

CEN/TC 444

Soil, treated biowaste and sludge – Determination of pH

60.60 Standard published

ISO/TC 190/SC 3

Soil, treated biowaste, sludge and waste — Digestion of aqua regia soluble fractions of elements

60.60 Standard published

ISO/TC 190/SC 3



Plastics waste

Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates

60.60 Standard published

CEN/TC 249

Plastics - Recycled Plastics - Characterisation of plastics wastes

90.93 Standard confirmed

CEN/TC 249

Plastics — Guidelines for the recovery and recycling of plastics waste

90.93 Standard confirmed

ISO/TC 61/SC 14



Packaging waste

Packaging - Optimization of energy recovery from packaging waste

60.60 Standard published

CEN/TC 261

Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste

90.93 Standard confirmed

CEN/TC 261



Wastewater treatment plants

Wastewater treatment plants - Part 1: General construction principles

90.60 Close of review

CEN/TC 165

Wastewater treatment plants - Part 10: Safety principles

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 11: General data required

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 12: Control and automation

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 14: Disinfection

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 16: Physical (mechanical) filtration

60.60 Standard published

CEN/TC 165

Wastewater treatment plants - Part 3: Preliminary treatment

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 3: Preliminary treatment

60.60 Standard published

CEN/TC 165

Wastewater treatment plants - Part 4: Primary settlement

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 5: Lagooning processes

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 6: Activated sludge process

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 7: Biological fixed-film reactors

90.60 Close of review

CEN/TC 165

Wastewater treatment plants - Part 8: Sludge treatment and storage

90.92 Standard to be revised

CEN/TC 165

Wastewater treatment plants - Part 9: Odour control and ventilation

90.92 Standard to be revised

CEN/TC 165

Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants

60.60 Standard published

CEN/TC 165

Guidelines for the management of assets of water supply and wastewater systems — Part 4: Wastewater treatment plants, sludge treatment facilities, pumping stations, retention and detention facilities

60.60 Standard published

ISO/TC 224



Wastewater treatment system

Small wastewater treatment systems for up to 50 PT - Part 2: Soil infiltration systems

60.60 Standard published

CEN/TC 165

Small wastewater treatment systems up to 50 PT - Part 5: Pre-treated Effluent Filtration systems

60.60 Standard published

CEN/TC 165

Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks

60.60 Standard published

CEN/TC 165

Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants

60.60 Standard published

CEN/TC 165

Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits

60.60 Standard published

CEN/TC 165

Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent

60.60 Standard published

CEN/TC 165

Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units

60.60 Standard published

CEN/TC 165



Waste containers

Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design

90.20 Standard under periodical review

CEN/TC 183

Stationary waste containers - Part 2: Performance requirements and test methods

90.20 Standard under periodical review

CEN/TC 183

Stationary waste containers - Part 3: Safety and health requirements

90.20 Standard under periodical review

CEN/TC 183

Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements

60.60 Standard published

CEN/TC 183

Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems

60.60 Standard published

CEN/TC 183

Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections

60.60 Standard published

CEN/TC 183

Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods

90.60 Close of review

CEN/TC 183

Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2006)

60.60 Standard published

CEN/TC 102

Washer-disinfectors — Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers

90.92 Standard to be revised

ISO/TC 198



Circular economy

Dismantling methods and protocols in a Circular Economy Framework - Composite recovery in the automotive industry

60.60 Standard published

CEN/WS 113



Household waste

Plastics sacks for household waste collection - Types, requirements and test methods

90.20 Standard under periodical review

CEN/TC 261

Packaging - Paper sacks for household waste collection - Types, requirements and test methods

90.93 Standard confirmed

CEN/TC 261