Standards on Explosive Atmospheres

Potentially explosive atmospheres - Explosion prevention and protection - Guidance on inerting for the prevention of explosions

60.60 Standard published

Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

60.60 Standard published

Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

60.60 Standard published

Explosive atmospheres - Part 43: Equipment in adverse service conditions

60.60 Standard published

Explosive atmospheres - Part 47: Equipment protection by 2-wire intrinsically safe Ethernet concept (2-WISE)

60.60 Standard published

Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

60.60 Standard published

Explosive atmospheres - Part 33: Equipment protection by special protection 's'

60.60 Standard published

Lightning Protection System Components (LPSC) - Part 2: Specific testing requirements for LPS components used in explosive atmospheres

60.60 Standard published

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

60.60 Standard published

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

90.93 Standard confirmed

Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres

90.92 Standard to be revised

Design of fans working in potentially explosive atmospheres

60.60 Standard published

Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres

90.93 Standard confirmed

Methodology for functional safety assessment of protective systems for potentially explosive atmospheres

90.93 Standard confirmed

Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres

60.60 Standard published

Industrial trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres

60.60 Standard published

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres

90.93 Standard confirmed

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust

90.93 Standard confirmed

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres

90.93 Standard confirmed

Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

60.60 Standard published

Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

60.60 Standard published

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

60.60 Standard published

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

60.60 Standard published

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

60.60 Standard published

Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

60.60 Standard published

Explosive atmospheres - Part 14: Electrical installations design, selection and erection

60.60 Standard published

Explosive atmospheres - Part 14: Electrical installations design, selection and erection

60.60 Standard published

Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

60.60 Standard published

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

60.60 Standard published

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

60.60 Standard published

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga

60.60 Standard published

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

60.60 Standard published

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

60.60 Standard published

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

60.60 Standard published

Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

60.60 Standard published

Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

60.60 Standard published

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

60.60 Standard published

Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

60.60 Standard published

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

60.60 Standard published

Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

60.60 Standard published

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

60.60 Standard published

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

60.60 Standard published

Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

60.60 Standard published

Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

60.60 Standard published

Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

60.60 Standard published

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

60.60 Standard published

Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

60.60 Standard published

Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

60.60 Standard published

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

60.60 Standard published

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

60.60 Standard published

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)

60.60 Standard published

Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements - Technical Corrigendum 1 (ISO 80079-36:2016/Cor 1:2019)

60.60 Standard published

Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' (ISO 80079-37:2016)

60.60 Standard published

Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017, including Cor 1:2018)

60.60 Standard published

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016)

60.60 Standard published

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)

60.60 Standard published

Explosive atmospheres - Part 34: Application of quality management systems for Ex Product manufacture (ISO/IEC 80079-34:2018)

60.60 Standard published

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)

60.60 Standard published

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)

60.60 Standard published

International Electrotechnical Vocabulary (IEV) - Part 426: Explosive atmospheres

60.60 Standard published

Interpretation sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Interpretation Sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

60.60 Standard published

Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

60.60 Standard published

Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

60.60 Standard published

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

60.60 Standard published

Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

60.60 Standard published

Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

60.60 Standard published

Explosive atmospheres - Part 14: Electrical installations design, selection and erection

60.60 Standard published

Intrepretation sheet 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

60.60 Standard published

Interpretation sheet 2 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

60.60 Standard published

Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

60.60 Standard published

Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

60.60 Standard published

Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

60.60 Standard published

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

Corrigendum 2 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

Explosive atmospheres - Part 26: Equipment with Separation Elements or combined Levels of Protection

60.60 Standard published

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

60.60 Standard published

Interpretation Sheet 1 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

60.60 Standard published

Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

60.60 Standard published

Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

60.60 Standard published

Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

60.60 Standard published

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

60.60 Standard published

Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

60.60 Standard published

Explosive atmospheres - Part 33: Equipment protection by special protection 's'

60.60 Standard published

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

60.60 Standard published

Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

60.60 Standard published

Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

60.60 Standard published

Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

60.60 Standard published

Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

60.60 Standard published

Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

60.60 Standard published

Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

Intrepretation sheet 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

60.60 Standard published

Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

60.60 Standard published

Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

60.60 Standard published

Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

60.60 Standard published

Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

60.60 Standard published

Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems

60.60 Standard published

Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment

60.60 Standard published

Explosive atmospheres - Part 43: Equipment in adverse service conditions

60.60 Standard published

Explosive atmospheres - Part 44: Personal competence

60.60 Standard published

Explosive atmospheres - Part 46: Equipment assemblies

60.60 Standard published

Explosive atmospheres - Part 47: Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)

60.60 Standard published

Explosive atmospheres - Part 48 - Portable or Personal Electronic Equipment – Guide for the use of equipment without a certificate for use in Hazardous Areas

60.60 Standard published

Pipework — Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres

90.93 Standard confirmed

Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements

90.93 Standard confirmed

Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements — Technical Corrigendum 1

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements

60.60 Standard published

Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements

60.60 Standard published

Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''

90.93 Standard confirmed

Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of protection constructional safety "c", control of ignition source "b", liquid immersion "k"

60.60 Standard published

Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data

60.60 Standard published

Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data — Technical Corrigendum 1

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data

60.60 Standard published

Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data

60.60 Standard published

Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods

90.93 Standard confirmed

Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods — Technical Corrigendum 1

60.60 Standard published

Corrigendum 1 - Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods

60.60 Standard published

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods

60.60 Standard published

Explosive atmospheres — Part 34: Application of quality management systems for Ex Product manufacture

60.60 Standard published

Explosive atmospheres - Part 34: Application of quality management systems for Ex Product manufacture

60.60 Standard published

Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines

90.93 Standard confirmed

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines

60.60 Standard published