Air quality


Technical committee




Indoor air quality

Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN 16798-1 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6)

60.60 Standard published

CEN/TC 156

Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance

90.93 Standard confirmed

CEN/TC 264

Energy performance of buildings - Ventilation for buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6

60.60 Standard published

CEN/TC 156

Indoor air — Part 40: Indoor air quality management system

60.60 Standard published

ISO/TC 146/SC 6

Building environment design — Indoor air quality — Methods of expressing the quality of indoor air for human occupancy

90.93 Standard confirmed

ISO/TC 205



Ambient air quality -

Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters

60.60 Standard published

CEN/TC 264

Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography

90.92 Standard to be revised

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

60.60 Standard published

CEN/TC 264

Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the determination of total gaseous mercury

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the determination of mercury deposition

90.93 Standard confirmed

CEN/TC 264



Air quality - measurement

Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses

90.93 Standard confirmed

CEN/TC 264

Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report

90.20 Standard under periodical review

CEN/TC 264



Air quality - stationary source emissions

Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

90.93 Standard confirmed

CEN/TC 264

Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

60.60 Standard published

CEN/TC 264



Air quality management

Intelligent transport systems - Urban ITS - Air quality management in urban areas

90.20 Standard under periodical review

CEN/TC 278

Indoor air — Part 40: Indoor air quality management system

60.60 Standard published

ISO/TC 146/SC 6



Air quality - certification of automated measuring systems

Air quality - Certification of automated measuring systems - Part 1: General principles

90.93 Standard confirmed

CEN/TC 264

Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer’s quality management system and post certification surveillance for the manufacturing process

90.93 Standard confirmed

CEN/TC 264

Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources

90.93 Standard confirmed

CEN/TC 264

Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources

60.60 Standard published

CEN/TC 264



Air quality

Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters

60.60 Standard published

CEN/TC 264

Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN 16798-1 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6)

60.60 Standard published

CEN/TC 156

Cabin air quality on civil aircraft – Chemical compounds

60.60 Standard published

CEN/TC 436

Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses

90.93 Standard confirmed

CEN/TC 264

Intelligent transport systems - Urban ITS - Air quality management in urban areas

90.20 Standard under periodical review

CEN/TC 278

Air quality - Performance evaluation of air quality sensor systems - Part 1: Gaseous pollutants in ambient air

60.60 Standard published

CEN/TC 264

Air quality - Approach to uncertainty estimation for ambient air reference measurement methods

60.60 Standard published

CEN/TC 264

Real drive test method for collecting vehicle interior air quality data

60.60 Standard published

CEN/WS 103

Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

90.93 Standard confirmed

CEN/TC 264

Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

60.60 Standard published

CEN/TC 264

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance

90.93 Standard confirmed

CEN/TC 264

Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography

90.92 Standard to be revised

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

60.60 Standard published

CEN/TC 264

Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report

90.20 Standard under periodical review

CEN/TC 264

Air quality - Certification of automated measuring systems - Part 1: General principles

90.93 Standard confirmed

CEN/TC 264

Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer’s quality management system and post certification surveillance for the manufacturing process

90.93 Standard confirmed

CEN/TC 264

Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources

90.93 Standard confirmed

CEN/TC 264

Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources

60.60 Standard published

CEN/TC 264

Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy

90.93 Standard confirmed

CEN/TC 264

Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the determination of total gaseous mercury

90.93 Standard confirmed

CEN/TC 264

Ambient air quality - Standard method for the determination of mercury deposition

90.93 Standard confirmed

CEN/TC 264

Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures

90.93 Standard confirmed

CEN/TC 264

Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene

90.93 Standard confirmed

CEN/TC 264

Air quality - Atmospheric measurements near ground with active Differential Optical Absorption Spectroscopy (DOAS) - Ambient air and diffuse emission measurements

90.93 Standard confirmed

CEN/TC 264

Energy performance of buildings - Ventilation for buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6

60.60 Standard published

CEN/TC 156

Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)

60.60 Standard published

CEN/TC 264

Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)

60.60 Standard published

CEN/TC 137

Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002)

90.93 Standard confirmed

CEN/TC 264

Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007)

90.93 Standard confirmed

CEN/TC 264

Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021)

60.60 Standard published

CEN/TC 196

Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)

60.60 Standard published

CEN/TC 264

Expression of performance of air quality infra-red analyzers

60.60 Standard published

TC 65/SC 65B

Air quality — Test method for filtration characterization of cleanable filter media

90.93 Standard confirmed

ISO/TC 146/SC 1

Air quality — Determination of the uncertainty of the time average of air quality measurements

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Determination of time-averaged mass emissions and emission factors — General approach

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Sampling conventions for airborne particle deposition in the human respiratory system

90.93 Standard confirmed

ISO/TC 146/SC 2

Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference

90.20 Standard under periodical review

ISO/TC 146/SC 4

Air quality — Determination of ozone in ambient air — Ultraviolet photometric method

90.60 Close of review

ISO/TC 146/SC 3

Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method

90.93 Standard confirmed

ISO/TC 146/SC 3

Ships and marine technology — Bulk carriers — Repair quality of hull structure

90.93 Standard confirmed

ISO/TC 8/SC 8

Indoor air — Part 40: Indoor air quality management system

60.60 Standard published

ISO/TC 146/SC 6

Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography — Part 1: Pumped sampling method

90.93 Standard confirmed

ISO/TC 146/SC 2

Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography — Part 2: Diffusive sampling method

90.93 Standard confirmed

ISO/TC 146/SC 2

Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl)piperazine and liquid chromatography

90.93 Standard confirmed

ISO/TC 146/SC 2

Space systems — Human-life activity support systems and equipment integration in space flight — Techno-medical requirements for space vehicle human habitation environments — Requirements for the air quality affected by harmful chemical contaminants

60.60 Standard published

ISO/TC 20/SC 14

Building environment design — Indoor air quality — Methods of expressing the quality of indoor air for human occupancy

90.93 Standard confirmed

ISO/TC 205

Workplace air quality — Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography

90.93 Standard confirmed

ISO/TC 146/SC 2

Air quality — Meteorology — Siting classifications for surface observing stations on land

90.93 Standard confirmed

ISO/TC 146/SC 5

Air quality — Guidelines for estimating measurement uncertainty

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Bulk materials — Part 1: Sampling and qualitative determination of asbestos in commercial bulk materials

90.60 Close of review

ISO/TC 146/SC 3

Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods

90.93 Standard confirmed

ISO/TC 146/SC 3

Air quality — Bulk materials — Part 3: Quantitative determination of asbestos by X-ray diffraction method

90.60 Close of review

ISO/TC 146/SC 3

Measurement of road tunnel air quality

60.60 Standard published

ISO/TC 146/SC 3

Air quality — Test methods for snow depth sensors

60.60 Standard published

ISO/TC 146/SC 5

Mining — Air quality control systems for operator enclosures — Performance requirements and test methods

60.60 Standard published

ISO/TC 82

Mining — Air quality control systems for operator enclosures — Performance requirements and test methods — Amendment 1

60.60 Standard published

ISO/TC 82

Air quality — Environmental meteorology — Part 1: Ground-based remote sensing of visual range by lidar

90.93 Standard confirmed

ISO/TC 146/SC 5

Air quality — Environmental meteorology — Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar

90.93 Standard confirmed

ISO/TC 146/SC 5

Air quality — Environmental meteorology — Part 3: Ground-based remote sensing of wind by continuous-wave Doppler lidar

60.60 Standard published

ISO/TC 146/SC 5

Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment

90.20 Standard under periodical review

ISO/TC 146/SC 3

Air quality — Determination of mass concentration of sulphur dioxide in ambient air — Thorin spectrophotometric method

90.20 Standard under periodical review

ISO/TC 146/SC 3

Air quality — General aspects — Vocabulary

60.60 Standard published

ISO/TC 146/SC 4

Air quality — General aspects — Units of measurement

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Exchange of data — Part 1: General data format

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Exchange of data — Part 2: Condensed data format

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Particle size fraction definitions for health-related sampling

90.60 Close of review

ISO/TC 146/SC 2

Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method

90.93 Standard confirmed

ISO/TC 146/SC 2

Air quality — Handling of temperature, pressure and humidity data

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Definition and determination of performance characteristics of an automatic measuring system

90.93 Standard confirmed

ISO/TC 146/SC 4

Air quality — Stratified sampling method for assessment of ambient air quality

90.93 Standard confirmed

ISO/TC 146/SC 4

Application of ubiquitous public access to-geographic information to an air quality information service

60.60 Standard published

ISO/TC 211