Main menu
Updated as of 2022-04-14
DISCLAIMER: This is an informative page, providing added value information on standards. Information may evolve and change subject to the publication of other legislative texts. Genorma.com informs its users that users are responsible for deciding the version of the standard that is applicable to their products, and not Genorma.com. As a consequence, Genorma.com users are encouraged to check the legal text accessible through the EUR-LEX website.
NOTE: This list has been updated in April 2022, considering the Commission Implementing Decision (EU) 2022/621 amending Implementing Decision (EU) 2019/436 as regards harmonised standards for truck mixers, cranes and other machinery drafted in support of Directive 2006/42/EC
The European Harmonised Standards, the reference of which have been published in the Official Journal under the Machinery Directive (Directive 2006/42/EC), provide a Presumption of Conformity regarding the requirements of such Directive.
According to the Article 7 (Presumption of conformity and harmonised standards) of the Machinery Directive, "Machinery manufactured in conformity with a harmonised standard, the references to which have been published in the Official Journal of the European Union, shall be presumed to comply with the essential health and safety requirements covered by such a harmonised standard".
Notes:
(A) Reference number of a relevant Directive or Regulation under which it was published in the OJ
(B) European standardisation organisation that adopted the relevant standard
(C) Reference number of a relevant European standard or of a European standard and its amendment(s)
(D) Title of a European standard
(E) See below
A-type standards
A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity (OJ C 348, 28.11.2013).
B-type standards
B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards (OJ C 348, 28.11.2013).
Dates and OJ references for establishing a presumption of conformity
(1) Date when a presumption of conformity starts or started in cases where a reference was published in the OJ without restriction. This date is usually, but not always, the same as the OJ reference date in column (2)
(2) Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ without restriction
Dates and OJ references for establishing a presumption of conformity with restriction
(3) Restriction published in the OJ to restrict a presumption of conformity – this includes restrictions on the basis of formal objections
(4) Date when a presumption of conformity with restriction starts or started in cases where a reference was published in the OJ with restriction. This date is usually, but not always, the same as the date in column (5)
(5) Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ with restriction
Dates and OJ references for ending a presumption of conformity
(6) Date when a presumption of conformity ends or ended
(7) Reference number and date of a relevant publication in the L or C series of the OJ where the date of withdrawal from the OJ (date in column (6)) was published
EN 1037:1995+A1:2008 | | title of the standard (D): Safety of machinery - Prevention of unexpected start-up | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:1.
EN 1114-3:2001+A1:2008 | | title of the standard (D): Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:61.
EN 1114-3:2019 | | title of the standard (D): Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:68.
EN 1127-1:2011 | | title of the standard (D): Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:62.
EN 1127-1:2019 | | title of the standard (D): Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | Type of standard: B 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:69.
EN 1175:2020 | | title of the standard (D): Safety of industrial trucks - Electrical/electronic requirements | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:98.
EN 1175-1:1998+A1:2010 | | title of the standard (D): Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:86.
EN 1175-2:1998+A1:2010 | | title of the standard (D): Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:87.
EN 1175-3:1998+A1:2010 | | title of the standard (D): Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:88.
EN 12012-1:2007+A1:2008 | | title of the standard (D): Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:46.
EN 12012-1:2018 | | title of the standard (D): Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:51.
EN 12012-3:2001+A1:2008 | | title of the standard (D): Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:47.
EN 12013:2000+A1:2008 | | title of the standard (D): Plastics and rubber machines - Internal mixers - Safety requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:10.
EN 12013:2018 | | title of the standard (D): Plastics and rubber machines - Internal mixers - Safety requirements | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:9.
EN 12301:2000+A1:2008 | | title of the standard (D): Plastics and rubber machines - Calenders - Safety requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:64.
EN 12301:2019 | | title of the standard (D): Plastics and rubber machines - Calenders - Safety requirements | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:80.
EN 12312-3:2017 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:89.
EN 12312-3:2017+A1:2020 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:104.
EN 12312-5:2005+A1:2009 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:114.
EN 12312-5:2021 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:127.
EN 12312-7:2005+A1:2009 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:90.
EN 12312-7:2020 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:105.
EN 12312-8:2005+A1:2009 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:48.
EN 12312-8:2018 | | title of the standard (D): Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:52.
EN 12385-5:2021 | | title of the standard (D): Steel wire ropes - Safety - Part 5: Stranded ropes for lifts | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:128.
EN 12609:2021 | | title of the standard (D): Truck mixers - Safety requirements | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:129.
EN 12643:2014 | | title of the standard (D): Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:65.
EN 12733:2001+A1:2009 | | title of the standard (D): Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:49.
EN 12733:2018 | | title of the standard (D): Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:53.
EN 12965:2003+A2:2009 | | title of the standard (D): Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:66.
EN 12965:2019 | | title of the standard (D): Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:81.
EN 12981:2005+A1:2009 | | title of the standard (D): Coating plants - Spray booths for application of organic powder coating material - Safety requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:50.
EN 12999:2011+A1:2012 | | title of the standard (D): Cranes - Loader cranes | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:11.
EN 12999:2011+A2:2018 | | title of the standard (D): Cranes - Loader cranes | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:10.
EN 12999:2020 | | title of the standard (D): Cranes - Loader cranes | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:10a.
EN 13001-2:2021 | | title of the standard (D): Crane safety - General design - Part 2: Load actions | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:130.
EN 13001-3-1:2012+A1:2013 | | title of the standard (D): Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:12.
EN 13001-3-1:2012+A2:2018 | | title of the standard (D): Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:11.
EN 13001-3-6:2018+A1:2021 | | title of the standard (D): Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:12a.
EN 13135:2013 | | title of the standard (D): Cranes - Safety - Design - Requirements for equipment | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:13.
EN 13135:2013+A1:2018 | | title of the standard (D): Cranes - Safety - Design - Requirements for equipment | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:13.
EN 13241:2003+A2:2016 | | title of the standard (D): Industrial, commercial, garage doors and gates - Product standard, performance characteristics | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:33.
EN 13241:2003+A2:2016 | | title of the standard (D): Industrial, commercial, garage doors and gates - Product standard, performance characteristics | Type of standard: C | Start of Presumption of Conformity: | | Restriction: Notice: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and s | Date of start of presumption of conformity with restriction (4) : 03/03/2021 | OJ reference for publication of a restriction in OJ (5) L 072/2021 | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex II | Row:2.
EN 13355:2004+A1:2009 | | title of the standard (D): Coating plants - Combined booths - Safety requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:51.
EN 13411-1:2002+A1:2008 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:91.
EN 13411-2:2001+A1:2008 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:92.
EN 13411-3:2004+A1:2008 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:93.
EN 13411-4:2011 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:94.
EN 13411-5:2003+A1:2008 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:95.
EN 13411-6:2004+A1:2008 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:96.
EN 13411-7:2006+A1:2008 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:97.
EN 13411-8:2011 | | title of the standard (D): Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:98.
EN 13525:2020 | | title of the standard (D): Forestry machinery - Wood chippers - Safety | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:82.
EN 13586:2004+A1:2008 | | title of the standard (D): Cranes - Access | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:99.
EN 13586:2020 | | title of the standard (D): Cranes - Access | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:106.
EN 13684:2004+A3:2009 | | title of the standard (D): Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:14.
EN 13684:2018 | | title of the standard (D): Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:14.
EN 13736:2003+A1:2009 | | title of the standard (D): Safety of machine tools - Pneumatic presses | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/03/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:18.
EN 13852-3:2021 | | title of the standard (D): Cranes - Offshore cranes - Part 3: Light offshore cranes | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:131.
EN 14017:2005+A2:2009 | | title of the standard (D): Agricultural and forestry machinery - Solid fertilizer distributors - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:7.
EN 14018:2005+A1:2009 | | title of the standard (D): Agricultural and forestry machinery - Seed drills - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:52.
EN 14033-4:2019 | | title of the standard (D): Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:54.
EN 1459-2:2015 | | title of the standard (D): Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:63.
EN 1459-2:2015+A1:2018 | | title of the standard (D): Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:46.
EN 1459-5:2020 | | title of the standard (D): Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:99.
EN 15011:2011+A1:2014 | | title of the standard (D): Cranes - Bridge and gantry cranes | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:100.
EN 1501-1:2011+A1:2015 | | title of the standard (D): Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:116.
EN 15011:2020 | | title of the standard (D): Cranes - Bridge and gantry cranes | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:107.
EN 1501-1:2021 | | title of the standard (D): Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:121.
EN 1501-2:2005+A1:2009 | | title of the standard (D): Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:117.
EN 1501-2:2021 | | title of the standard (D): Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:122.
EN 1501-3:2008 | | title of the standard (D): Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:118.
EN 1501-3:2021 | | title of the standard (D): Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:123.
EN 1501-5:2011 | | title of the standard (D): Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:119.
EN 1501-5:2021 | | title of the standard (D): Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:124.
EN 15194:2017 | | title of the standard (D): Cycles - Electrically power assisted cycles - EPAC Bicycles | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:16.
EN 15571:2020 | | title of the standard (D): Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:108.
EN 15895:2011 | | title of the standard (D): Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:15.
EN 15895:2011+A1:2018 | | title of the standard (D): Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:17.
EN 1612:2019 | | title of the standard (D): Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:75.
EN 1612-1:1997+A1:2008 | | title of the standard (D): Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:67.
EN 16307-1:2013+A1:2015 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:101.
EN 16307-1:2020 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:111.
EN 16486:2014 | | title of the standard (D): Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:102.
EN 16486:2014+A1:2020 | | title of the standard (D): Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:112.
EN 16564:2020 | | title of the standard (D): Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:113.
EN 16712-4:2018 | | title of the standard (D): Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16 | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:55.
EN 16719:2018 | | title of the standard (D): Transport platforms | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:20.
EN 16770:2018 | | title of the standard (D): Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:56.
EN 16808:2020 | | title of the standard (D): Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:114.
EN 16851:2017 | | title of the standard (D): Cranes - Light crane systems | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:103.
EN 16851:2017+A1:2020 | | title of the standard (D): Cranes - Light crane systems | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:115.
EN 16952:2018 | | title of the standard (D): Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:21.
EN 16985:2018 | | title of the standard (D): Spray booths for organic coating material - Safety requirements | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:57.
EN 17059:2018 | | title of the standard (D): Plating and anodizing lines - Safety requirements | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:22.
EN 17067:2018 | | title of the standard (D): Forestry machinery - Safety requirements on radio remote controls | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:58.
EN 1710:2005+A1:2008 | | title of the standard (D): Equipment and components intended for use in potentially explosive atmospheres in underground mines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/03/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:20.
EN 1756-1:2001+A1:2008 | | title of the standard (D): Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:120.
EN 1756-1:2021 | | title of the standard (D): Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:125.
EN 1804-1:2001+A1:2010 | | title of the standard (D): Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:104.
EN 1804-1:2020 | | title of the standard (D): Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:100.
EN 1804-2:2001+A1:2010 | | title of the standard (D): Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:105.
EN 1804-2:2020 | | title of the standard (D): Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:101.
EN 1804-3:2006+A1:2010 | | title of the standard (D): Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:106.
EN 1804-3:2020 | | title of the standard (D): Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:102.
EN 1829-1:2010 | | title of the standard (D): High pressure water jet machines - Safety requirements - Part 1: Machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:121.
EN 1829-1:2021 | | title of the standard (D): High-pressure water jet machines - Safety requirements - Part 1: Machines | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:126.
EN 1837:1999+A1:2009 | | title of the standard (D): Safety of machinery - Integral lighting of machines | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:107.
EN 1837:2020 | | title of the standard (D): Safety of machinery - Integral lighting of machines | Type of standard: B 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:95.
EN 1853:1999+A1:2009 | | title of the standard (D): Agricultural machinery - Trailers with tipping body - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:3.
EN 1853:2017 | | title of the standard (D): Agricultural machinery - Trailers - Safety | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:2.
EN 1870-13:2007+A2:2012 | | title of the standard (D): Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:38.
EN 1870-14:2007+A2:2012 | | title of the standard (D): Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:35.
EN 1870-19:2013 | | title of the standard (D): Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:68.
EN 1870-4:2012 | | title of the standard (D): Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:69.
EN 1870-6:2002+A1:2009 | | title of the standard (D): Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:4.
EN 1870-6:2017 | | title of the standard (D): Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:3.
EN 1889-1:2011 | | title of the standard (D): Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:43.
EN 1974:1998+A1:2009 | | title of the standard (D): Food processing machinery - Slicing machines - Safety and hygiene requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:108.
EN 1974:2020 | | title of the standard (D): Food processing machinery - Slicing machines - Safety and hygiene requirements | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:103.
EN 201:2009 | | title of the standard (D): Plastics and rubber machines - Injection moulding machines - Safety requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:109.
EN 303-5:2012 | | title of the standard (D): Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:122.
EN 303-5:2021 | | title of the standard (D): Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:120.
EN 349:1993+A1:2008 | | title of the standard (D): Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:70.
EN 474-1:2006+A4:2013 | | title of the standard (D): Earth-moving machinery - Safety - Part 1: General requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:2.
EN 474-1:2006+A5:2018 | | title of the standard (D): Earth-moving machinery - Safety - Part 1: General requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: Notice: This publication does not concern clause 5.8.1 Visibility – Operator’s field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) L 115/2022 | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex IIA | Row:1.
EN 474-1:2006+A6:2019 | | title of the standard (D): Earth-moving machinery - Safety - Part 1: General requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: Notice 1: This publication does not concern clause 5.8.1 Visibility – Operator’s field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer | Date of start of presumption of conformity with restriction (4) : 15/10/2021 | OJ reference for publication of a restriction in OJ (5) L 366/2021 | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex II | Row:1.
EN 50569:2013 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:29.
EN 50569:2013 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 12/01/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:21.
EN 50569:2013/A1:2018 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:29.
EN 50570:2013 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:30.
EN 50570:2013 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 12/01/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:22.
EN 50570:2013/A1:2018 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:30.
EN 50571:2013 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 12/01/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:23.
EN 50571:2013 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:31.
EN 50571:2013/A1:2018 | | title of the standard (D): Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:31.
EN 50636-2-107:2015 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:72.
EN 50636-2-107:2015 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 12/01/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:24.
EN 50636-2-107:2015 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:32.
EN 50636-2-107:2015 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:90a.
EN 50636-2-107:2015/A1:2018 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:32.
EN 50636-2-107:2015/A1:2018 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:90a.
EN 50636-2-107:2015/A1:2018 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:72.
EN 50636-2-107:2015/A2:2020 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:90a.
EN 50636-2-107:2015/A3:2021 | | title of the standard (D): Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:90a.
EN 574:1996+A1:2008 | | title of the standard (D): Safety of machinery - Two-hand control devices - Functional aspects - Principles for design | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:71.
EN 60204-1:2006 | | title of the standard (D): Safety of machinery - Electrical equipment of machines - Part 1: General requirements | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:53.
EN 60204-1:2006/A1:2009 | | title of the standard (D): Safety of machinery - Electrical equipment of machines - Part 1: General requirements | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:53.
EN 60204-1:2006/AC:2010 | | title of the standard (D): | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:53.
EN 60204-1:2018 | | title of the standard (D): Safety of machinery - Electrical equipment of machines - Part 1: General requirements | Type of standard: B 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:61.
EN 60204-11:2000 | | title of the standard (D): Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:54.
EN 60204-11:2000/AC:2010 | | title of the standard (D): | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:54.
EN 60335-1:2012 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 1: General requirements | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:33a.
EN 60335-1:2012 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 1: General requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/05/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:25.
EN 60335-1:2012/A11:2014 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 1: General requirements | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:33a.
EN 60335-1:2012/A11:2014 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 1: General requirements | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/05/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:25.
EN 60335-1:2012/A13:2017 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 1: General requirements | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:33a.
EN 60335-1:2012/A15:2021 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 1: General requirements | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:33a.
EN 60335-1:2012/AC:2014 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 1: General requirements | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:33a.
EN 60335-2-58:2005 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:34.
EN 60335-2-58:2005/A12:2016 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:34.
EN 60335-2-58:2005/A2:2015 | | title of the standard (D): Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:34.
EN 60745-2-1:2010 | | title of the standard (D): Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/01/2022 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:26.
EN 60745-2-13:2009 | | title of the standard (D): Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/05/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:73.
EN 60745-2-13:2009/A1:2010 | | title of the standard (D): Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/05/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:73.
EN 60745-2-17:2010 | | title of the standard (D): Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/12/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:27.
EN 60745-2-21:2009 | | title of the standard (D): Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:57.
EN 60745-2-21:2009/A1:2010 | | title of the standard (D): Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:57.
EN 60745-2-6:2010 | | title of the standard (D): Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:110.
EN 61029-2-4:2011 | | title of the standard (D): Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 24/06/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:29.
EN 61496-1:2013 | | title of the standard (D): Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:36.
EN 62061:2005 | | title of the standard (D): Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:123.
EN 62061:2005/A1:2013 | | title of the standard (D): Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:123.
EN 62061:2005/A2:2015 | | title of the standard (D): Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:123.
EN 62061:2005/AC:2010 | | title of the standard (D): | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:123.
EN 62745:2017 | | title of the standard (D): Safety of machinery - Requirements for cableless control systems of machinery | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:89.
EN 62745:2017/A11:2020 | | title of the standard (D): Safety of machinery - Requirements for cableless control systems of machinery | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:89.
EN 62841-2-1:2018 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:35.
EN 62841-2-1:2018/A11:2019 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:35.
EN 62841-2-11:2016 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:91.
EN 62841-2-11:2016 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:74.
EN 62841-2-11:2016/A1:2020 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:91.
EN 62841-2-17:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:36.
EN 62841-2-21:2019 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:65.
EN 62841-3-1:2014 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/10/2019 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:28.
EN 62841-3-1:2014 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:37.
EN 62841-3-1:2014/A11:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:37.
EN 62841-3-10:2015 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:41.
EN 62841-3-10:2015 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/10/2019 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:32.
EN 62841-3-10:2015/A11:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:41.
EN 62841-3-12:2019 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:64.
EN 62841-3-14:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:42.
EN 62841-3-4:2016 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:38.
EN 62841-3-4:2016 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:92.
EN 62841-3-4:2016 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:75.
EN 62841-3-4:2016/A1:2020 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:92.
EN 62841-3-4:2016/A11:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:38.
EN 62841-3-4:2016/A11:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:92.
EN 62841-3-4:2016/A11:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:75.
EN 62841-3-4:2016/A12:2020 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:92.
EN 62841-3-6:2014 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:39.
EN 62841-3-6:2014 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/10/2019 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:30.
EN 62841-3-6:2014/A11:2017 | | title of the standard (D): Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:39.
EN 62841-3-9:2015 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/11/2019 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:31.
EN 62841-3-9:2015 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:76.
EN 62841-3-9:2015 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:40.
EN 62841-3-9:2015/A11:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:76.
EN 62841-3-9:2015/A11:2017 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:40.
EN 62841-3-9:2015/AC:2016-09 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:76.
EN 62841-4-1:2020 | | title of the standard (D): Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:94.
EN 62841-4-2:2019 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:63.
EN 692:2005+A1:2009 | | title of the standard (D): Machine tools - Mechanical presses - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:16.
EN 693:2001+A2:2011 | | title of the standard (D): Machine tools - Safety - Hydraulic presses | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/03/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:17.
EN 707:1999+A1:2009 | | title of the standard (D): Agricultural machinery - Slurry tankers - Safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:41.
EN 707:2018 | | title of the standard (D): Agricultural machinery - Slurry tankers - Safety | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:45.
EN 786:1996+A2:2009 | | title of the standard (D): Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:34.
EN 792-13:2000+A1:2008 | | title of the standard (D): Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:42.
EN 81-40:2008 | | title of the standard (D): Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:111.
EN 81-40:2020 | | title of the standard (D): Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:97.
EN 848-1:2007+A2:2012 | | title of the standard (D): Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/03/2021 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:19.
EN 848-3:2012 | | title of the standard (D): Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:55.
EN 859:2007+A2:2012 | | title of the standard (D): Safety of woodworking machines - Hand fed surface planing machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:58.
EN 860:2007+A2:2012 | | title of the standard (D): Safety of woodworking machines - One side thickness planing machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:59.
EN 861:2007+A2:2012 | | title of the standard (D): Safety of woodworking machines - Surface planing and thicknessing machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:60.
EN 940:2009+A1:2012 | | title of the standard (D): Safety of woodworking machines - Combined woodworking machines | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:77.
EN IEC 60204-11:2019 | | title of the standard (D): Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV | Type of standard: B 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:62.
EN IEC 62061:2021 | | title of the standard (D): Safety of machinery - Functional safety of safety-related control systems | Type of standard: B 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:134.
EN IEC 62841-2-6:2020 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:118.
EN IEC 62841-2-6:2020/A11:2020 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:118.
EN IEC 62841-3-9:2020 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:93.
EN IEC 62841-3-9:2020/A11:2020 | | title of the standard (D): Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:93.
EN ISO 10517:2009 | | title of the standard (D): Powered hand-held hedge trimmers - Safety (ISO 10517:2009) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:45.
EN ISO 10517:2009/A1:2013 | | title of the standard (D): Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:45.
EN ISO 10517:2019 | | title of the standard (D): Powered hand-held hedge trimmers - Safety (ISO 10517:2019) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:49.
EN ISO 11148-13:2018 | | title of the standard (D): Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:50.
EN ISO 11200:2014 | | title of the standard (D): Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:37.
EN ISO 11202:2010 | | title of the standard (D): Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:124.
EN ISO 11202:2010 | | title of the standard (D): Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) | Type of standard: B 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:119.
EN ISO 11202:2010/A1:2021 | | title of the standard (D): Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202 | Type of standard: B 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:119.
EN ISO 11203:2009 | | title of the standard (D): Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:71.
EN ISO 11203:2009 | | title of the standard (D): Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:78.
EN ISO 11203:2009/A1:2020 | | title of the standard (D): Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020) | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:71.
EN ISO 11553-1:2008 | | title of the standard (D): Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:112.
EN ISO 11553-1:2020 | | title of the standard (D): Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020) | Type of standard: B 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:96.
EN ISO 11553-1:2020/A11:2020 | | title of the standard (D): Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020) | Type of standard: B 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:96.
EN ISO 13766-2:2018 | | title of the standard (D): Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:15.
EN ISO 13851:2019 | | title of the standard (D): Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019) | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:72.
EN ISO 13854:2019 | | title of the standard (D): Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017) | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:73.
EN ISO 13857:2008 | | title of the standard (D): Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:79.
EN ISO 13857:2019 | | title of the standard (D): Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019) | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:74.
EN ISO 14118:2018 | | title of the standard (D): Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) | Type of standard: B 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:1.
EN ISO 15012-4:2016 | | title of the standard (D): Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:85.
EN ISO 16092-1:2018 | | title of the standard (D): Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:18.
EN ISO 16092-2:2020 | | title of the standard (D): Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019) | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:109.
EN ISO 16092-3:2018 | | title of the standard (D): Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:19.
EN ISO 16092-4:2020 | | title of the standard (D): Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019) | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:110.
EN ISO 18497:2018 | | title of the standard (D): Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018) | Type of standard: B 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:43.
EN ISO 19085-1:2017 | | title of the standard (D): Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:125.
EN ISO 19085-1:2021 | | title of the standard (D): Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021) | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:132.
EN ISO 19085-10:2019 | | title of the standard (D): Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, Corrected version 2019-12) | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:116.
EN ISO 19085-10:2019/A11:2020 | | title of the standard (D): Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, including Corrected version 2019-12) | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:116.
EN ISO 19085-11:2020 | | title of the standard (D): Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:84.
EN ISO 19085-13:2020 | | title of the standard (D): Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:85.
EN ISO 19085-3:2017 | | title of the standard (D): Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: Notice: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC | Date of start of presumption of conformity with restriction (4) : 24/10/2019 | OJ reference for publication of a restriction in OJ (5) L 270/2019 | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex II | Row:3.
EN ISO 19085-4:2018 | | title of the standard (D): Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:23.
EN ISO 19085-6:2017 | | title of the standard (D): Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:24.
EN ISO 19085-7:2019 | | title of the standard (D): Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:67.
EN ISO 19085-8:2018 | | title of the standard (D): Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:25.
EN ISO 19085-9:2020 | | title of the standard (D): Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:83.
EN ISO 19225:2017 | | title of the standard (D): Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:26.
EN ISO 19225:2017 | | title of the standard (D): Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:26a.
EN ISO 19225:2017/A1:2019 | | title of the standard (D): Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1 (ISO 19225:2017/Amd 1:2019) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:26a.
EN ISO 19296:2018 | | title of the standard (D): Mining - Mobile machines working underground - Machine safety (ISO 19296:2018) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:59.
EN ISO 19353:2016 | | title of the standard (D): Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:40.
EN ISO 19353:2019 | | title of the standard (D): Safety of machinery - Fire prevention and fire protection (ISO 19353:2019) | Type of standard: B 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:44.
EN ISO 19432:2012 | | title of the standard (D): Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:80.
EN ISO 19432-1:2020 | | title of the standard (D): Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels ( | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:86.
EN ISO 20361:2015 | | title of the standard (D): Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:81.
EN ISO 20361:2019 | | title of the standard (D): Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:87.
EN ISO 20361:2019/A11:2020 | | title of the standard (D): Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:87.
EN ISO 20430:2020 | | title of the standard (D): Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020) | Type of standard: C 15/10/2021 | Start of Presumption of Conformity: 15/10/2021 | L 366/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:117.
EN ISO 20607:2019 | | title of the standard (D): Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019) | Type of standard: B 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:66.
EN ISO 21904-1:2020 | | title of the standard (D): Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:88.
EN ISO 22868:2011 | | title of the standard (D): Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 11/10/2023 | OJ reference for withdrawal from OJ (7): L 115/2022 | Annex and Row: Annex III | Row:126.
EN ISO 22868:2021 | | title of the standard (D): Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021) | Type of standard: C 13/04/2022 | Start of Presumption of Conformity: 13/04/2022 | L 115/2022 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:133.
EN ISO 28927-2:2009 | | title of the standard (D): Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:27.
EN ISO 28927-2:2009 | | title of the standard (D): Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:56.
EN ISO 28927-2:2009/A1:2017 | | title of the standard (D): Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:27.
EN ISO 28927-4:2010 | | title of the standard (D): Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:60.
EN ISO 28927-4:2010 | | title of the standard (D): Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/04/2020 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:39.
EN ISO 28927-4:2010/A1:2018 | | title of the standard (D): Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010/Amd 1:2017) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:60.
EN ISO 3691-1:2015 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:76.
EN ISO 3691-1:2015 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:82.
EN ISO 3691-1:2015/A1:2020 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Amendment 1 (ISO 3691-1:2011/Amd 1:2020) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:76.
EN ISO 3691-1:2015/AC:2016 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:76.
EN ISO 3691-1:2015/AC:2016 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:82.
EN ISO 3691-5:2014 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:44.
EN ISO 3691-5:2014/AC:2014 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 02/10/2021 | OJ reference for withdrawal from OJ (7): L 102/2020 | Annex and Row: Annex III | Row:44.
EN ISO 3691-5:2015 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:47.
EN ISO 3691-5:2015 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:47a.
EN ISO 3691-5:2015/A1:2020 | | title of the standard (D): Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks - Amendment 1 (ISO 3691-5:2014/Amd 1:2020) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:47a.
EN ISO 3743-2:2009 | | title of the standard (D): Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1 | Type of standard: B | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 15/04/2023 | OJ reference for withdrawal from OJ (7): L 366/2021 | Annex and Row: Annex III | Row:113.
EN ISO 3743-2:2019 | | title of the standard (D): Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2 | Type of standard: B 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:70.
EN ISO 4254-11:2010 | | title of the standard (D): Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:83.
EN ISO 4254-11:2010 | | title of the standard (D): Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:77.
EN ISO 4254-11:2010/A1:2020 | | title of the standard (D): Agricultural machinery - Safety - Part 11: Pick-up balers - Amendment 1 (ISO 4254-11:2010/Amd 1:2020) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:77.
EN ISO 4254-5:2009 | | title of the standard (D): Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:5.
EN ISO 4254-5:2018 | | title of the standard (D): Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:4.
EN ISO 4254-7:2009 | | title of the standard (D): Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:6.
EN ISO 4254-7:2017 | | title of the standard (D): Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017, Corrected version 2019-03) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:5.
EN ISO 4254-8:2018 | | title of the standard (D): Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:6.
EN ISO 4254-9:2018 | | title of the standard (D): Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018) | Type of standard: C 02/04/2020 | Start of Presumption of Conformity: 02/04/2020 | L 102/2020 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:48.
EN ISO 5010:2019 | | title of the standard (D): Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:78.
EN ISO 5395-1:2013 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:7.
EN ISO 5395-1:2013 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:8.
EN ISO 5395-1:2013/A1:2018 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:201 | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:7.
EN ISO 5395-3:2013 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:9.
EN ISO 5395-3:2013 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:8.
EN ISO 5395-3:2013/A1:2017 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher and te | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:8.
EN ISO 5395-3:2013/A1:2017 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher and te | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 19/09/2020 | OJ reference for withdrawal from OJ (7): L 075/2019 | Annex and Row: Annex III | Row:9.
EN ISO 5395-3:2013/A2:2018 | | title of the standard (D): Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:8.
EN ISO 7096:2008 | | title of the standard (D): Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:84.
EN ISO 7096:2008/AC:2009 | | title of the standard (D): Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) | Type of standard: C | Start of Presumption of Conformity: | | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): 03/09/2022 | OJ reference for withdrawal from OJ (7): L 072/2021 | Annex and Row: Annex III | Row:84.
EN ISO 7096:2020 | | title of the standard (D): Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020) | Type of standard: C 03/03/2021 | Start of Presumption of Conformity: 03/03/2021 | L 072/2021 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:79.
EN ISO/IEC 80079-38:2016 | | title of the standard (D): Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:28.
EN ISO/IEC 80079-38:2016/A1:2018 | | title of the standard (D): Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) | Type of standard: C 19/03/2019 | Start of Presumption of Conformity: 19/03/2019 | L 075/2019 | Restriction: | Date of start of presumption of conformity with restriction (4) : | OJ reference for publication of a restriction in OJ (5) | Date of withdrawal from OJ (end of presumption of conformity)(6): | OJ reference for withdrawal from OJ (7): | Annex and Row: Annex I | Row:28.