This part of IEC 61347 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 250 V and/or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz.
This standard also covers lamp controlgear for lamps which are not yet standardized.
Tests dealt with in this standard are type tests. Requirements for testing individual lamp controlgear during production are not included.
This part 1 is to be used in conjunction with the appropriate part 2, which contains clauses to supplement or modify the corresponding clauses in part 1, to provide the relevant requirements for each type of product.
This first edition of IEC 61347-1, together with parts 1 to 9 of IEC 61347-2, cancels and replaces IEC 60920, IEC 60922, IEC 60924, IEC 60926, IEC 60928 and IEC 61046, and constitute a minor revision.
The relationship between the parts that make up IEC 61347-2 and the IEC standards they replace is detailed as follows:
IEC 61347-2-1 replaces IEC 60926
IEC 61347-2-2 replaces IEC 61046
IEC 61347-2-3 replaces IEC 60928
IEC 61347-2-4 replaces IEC 60924, Section 3
IEC 61347-2-5 replaces IEC 60924, Section 4
IEC 61347-2-6 replaces IEC 60924, Section 5
IEC 61347-2-7 replaces IEC 60924, Section 6
IEC 61347-2-8 replaces IEC 60920
IEC 61347-2-9 replaces IEC 60922
IEC 60924:1990 ED1
IEC 60924:1990/AMD1:1993 ED1
IEC 60926:1995 ED2
IEC 60926:1995/AMD1:1999 ED2
IEC 60928:1995 ED2
IEC 60928:1995/AMD1:1999 ED2
IEC 61046:1993 ED2
IEC 61046:1993/AMD1:1995 ED2
IEC 61347-1:2000 ED1
99.60 Withdrawal effective
Jan 31, 2007
IEC 61347-1:2000/AMD1:2003 ED1
IEC 61347-1:2007 ED2