IEC 61000-4-6:2013 ED4

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

Publication date:   Oct 23, 2013

General information

60.60 Standard published   Oct 23, 2013

IEC

TC 77/SC 77B

International Standard

33.100.20   Immunity

Buying

Published

Language in which you want to receive the document.

Scope

IEC 61000-4-6:2013 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 150 kHz up to 80 MHz. Equipment not having at least one conducting wire and/or cable (such as mains supply, signal line or earth connection) which can couple the equipment to the disturbing RF fields is excluded from the scope of this publication. The object of this standard is to establish a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by RF fields. The test method documented in IEC 61000-4-6:2013 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. This fourth edition cancels and replaces the third edition published in 2008 and constitutes a technical revision. It includes the following significant technical changes with respect to the previous edition:
- use of the CDNs;
- calibration of the clamps;
- reorganization of Clause 7 on test setup and injection methods;
- Annex A which is now dedicated to EM and decoupling clamps;
- Annex G which now addresses the measurement uncertainty of the voltage test level;
- and informative Annexes H, I and J which are new. The contents of the corrigendum of June 2015 have been included in this copy.

Life cycle

PREVIOUSLY

Revises
IEC 61000-4-6:2008 ED3

NOW

PUBLISHED
IEC 61000-4-6:2013 ED4
60.60 Standard published
Oct 23, 2013

CORRIGENDA / AMENDMENTS

Corrected by
IEC 61000-4-6:2013/COR1:2015 ED4

REVISED BY

IN_DEVELOPMENT
IEC 61000-4-6 ED5