IEC 61851-1:2010 ED2

Electric vehicle conductive charging system - Part 1: General requirements IEC 61851-1:2010 ED2

Publication date:   Nov 25, 2010

General information

99.60 Withdrawal effective   Feb 7, 2017

WPUB   

IEC

TC 69

International Standard

43.120   Electric road vehicles

Buying

Revised

Language in which you want to receive the document.

Scope

IEC 61851-1:2010 applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network. It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed. This second edition cancels and replaces the first edition published in 2001. It constitutes a technical revision. The main changes with respect to the first edition of this standard are:
- revision of connector definitions and current levels (Clause 8);
- modification definition of pilot wire to pilot function;
- division of Clause 9 to create Clauses 9 and 11;
- Clause 9: specific requirements for inlet, plug and socket-outlet;
- Clause 11: EVSE requirements: the basic generic requirements for charging stations;
- renumbering of annexes;
- deletion of previous Annex A and integration of charging cable requirements into new Clause 10;
- Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B;
- replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values;
- new informative Annex C describing an alternative pilot function system.
This publication is of high relevance for Smart Grid.

Life cycle

PREVIOUSLY

WITHDRAWN
IEC 61851-1:2001 ED1

NOW

WITHDRAWN
IEC 61851-1:2010 ED2
99.60 Withdrawal effective
Feb 7, 2017

REVISED BY

PUBLISHED
IEC 61851-1:2017 ED3