IEC 61267:2005 ED2

Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics

Publication date:   Nov 9, 2005

General information

60.60 Standard published   Nov 9, 2005

IEC

TC 62/SC 62C Equipment for radiotherapy, nuclear medicine and radiation dosimetry

International Standard

11.040.50   Radiographic equipment

Buying

Published

Language in which you want to receive the document.

Scope

This International Standard applies to test procedures which, for the determination of characteristics of systems or components of medical diagnostic X-ray equipment, require well-defined radiation conditions.

Except for mammography, this standard does not apply to conditions where discontinuities in radiation absorption of elements are deliberately used to modify properties of the radiation beam (for example by rare earth filters).

This standard deals with methods for generating radiation beams with radiation conditions which can be used under test conditions typically found in test laboratories or in manufacturing facilities for the determination of characteristics of medical diagnostic X-ray equipment.

Examples of such radiation qualities are radiation beams emerging through the filtration from the X-ray source assembly. radiation conditions represent the more general case, where scattered radiation emerges from an exit surface of a patient or a phantom. This requires a well defined geometrical arrangement.

Life cycle

PREVIOUSLY

Revises
IEC 61267:1994 ED1

NOW

PUBLISHED
IEC 61267:2005 ED2
60.60 Standard published
Nov 9, 2005

REVISED BY

IN_DEVELOPMENT
IEC 61267 ED3