CEN/TS 927-9:2018

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength after water exposure

Publication date:   Mar 14, 2019

General information

60.60 Standard published   Dec 5, 2018

CEN

CEN/TC 139 Paints and varnishes

Technical Specification

87.040   Paints and varnishes

Buying

Published

Language in which you want to receive the document.

Scope

This Technical Specification specifies a method for assessing the resistance of a coating system on wet wood to separation from the substrate by measuring the force necessary to detach or rupture the coating system by a normal tensile strain applied through an attached stud (dolly). Additional information is gained by noting the type and locus of failure. The force required for detachment will depend on several factors including the adhesion of the coating to the substrate and between intermediate coating layers. The procedure is not regarded as a direct means of measuring adhesion but an indicator of adhesive performance (adherence) under wet conditions.
A procedure for wetting the wood substrate is described. The test method is only suitable for wood and wood based substrates.
For dry adhesion the test method is allowed to be carried out without wetting in which case it will differ very little from EN ISO 4624.

Life cycle

NOW

PUBLISHED
CEN/TS 927-9:2018
60.60 Standard published
Dec 5, 2018

REVISED BY

IN_DEVELOPMENT
prCEN/TS 927-9 rev