EN 16215:2020

Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs and of indicator PCBs by GC/HRMS EN 16215:2020

Publication date:   May 18, 2020

General information

60.60 Standard published   Jan 8, 2020

CEN

CEN/TC 327 Animal feeding stuffs - Methods of sampling and analysis

European Norm

65.120   Animal feeding stuffs

Buying

Published

Language in which you want to receive the document.

Scope

This document is applicable to the determination of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), (together termed ‘dioxins’ (PCDD/Fs)) and dioxin-like PCBs and non-dioxin-like PCBs (dl-PCBs and ndl-PCBs) in animal feeding stuffs. Collaborative studies have been carried out. The method is suitable for the determination of dioxins, dl-PCBs and ndl-PCBs at the appropriate MRL in compound feed and ingredients e.g. oil, mineral clay. The method is applicable to samples containing trace level amounts of one or more dioxins, dioxin-like PCBs and non-dioxin-likePCBs. The limit of quantification (LOQ) is
- 0,05 pg/g (OCDD/F = 0,1 pg/g) for the relevant individual congeners of dioxins/furans,
- 0,05 pg/g for non-ortho PCBs,
- 10 pg/g for mono-ortho PCBs, and
- 100 pg/g for non-dioxin-like-PCBs.
For determination of dioxins and dioxin-like PCBs, the procedure can be used as confirmatory method as defined by Commission Regulation (EC) No 152/2009 for dioxins and dl-PCB in feed [1]. Confirmatory methods as described in this standard are high-resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) methods. If only the analysis of non-dioxin-like PCBs is required, a GC-LRMS method can be used (e.g. EN 15741 [2]) provided that appropriate analytical performance criteria are met in the relevant range for the matrix of interest.
This document is split into four modules. Each module describes a part of the whole procedure (see Figure 1 and Figure 2) to be followed:
a) Module A: Description of standards which might be used;
b) Module B: Description of extraction procedures;
c) Module C: Description of clean-up procedures;
d) Module D: GC/HRMS determination.
Each module describes a part of the whole method as well as, when applicable, alternatives which should be equivalent. Each module has to be regarded as an example. Combining modules and/or alternatives gives a highly flexible, "performance based" procedure. It is permitted to modify the method if all performance criteria laid down in Commission Regulation (EC) No 152/2009 [1] are met.
Any deviation of the described method, combination of modules needs to be recorded as part of the QA/QC procedures of accredited laboratories and should be available on request.

Figure 1 - Flow scheme for the determination of dioxins, dl-PCBs and non-dioxin-like-PCBs in feed

Figure 2 - Flow scheme for the determination of dioxins, dl-PCBs and non-dioxin-like-PCBs in oil and fat

Related legislation

Legislation related to this standard

882/2004

Regulation (EC) No 882/2004 of the European Parliament and of the Council of 29 April 2004 onofficial controls performed to ensure the verification of compliance with feed and food law, animal health and animal welfare rules

Life cycle

PREVIOUSLY

WITHDRAWN
EN 16215:2012

NOW

PUBLISHED
EN 16215:2020
60.60 Standard published
Jan 8, 2020