EN ISO 17892-10:2018

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018) EN ISO 17892-10:2018

Publication date:   Apr 11, 2019

General information

60.60 Standard published   Dec 19, 2018

CEN

CEN/TC 341 Geotechnical Investigation and Testing

European Norm

13.080.20   Physical properties of soils | 93.020   Earthworks. Excavations. Foundation construction. Underground works

Buying

Published

Language in which you want to receive the document.

Scope

This document specifies two laboratory test methods for the determination of the effective shear strength of soils under consolidated drained conditions using either a shearbox or a ring shear device.
This document is applicable to the laboratory determination of effective shear strength parameters for soils in direct shear within the scope of geotechnical investigations.
The tests included in this document are for undisturbed, remoulded, re-compacted or reconstituted soils. The procedure describes the requirements of a determination of the shear resistance of a specimen under a single vertical (normal) stress. Generally three or more similar specimens from one soil are prepared for shearing under three or more different vertical pressures to allow the shear strength parameters to be determined in accordance with Annex B.
Special procedures for preparation and testing the specimen, such as staged loading and pre-shearing or for interface tests between soils and other materials, are not covered in the procedure of this document.
NOTE This document fulfils the requirements of the determination of the drained shear strength of soils in direct shear for geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

Life cycle

NOW

PUBLISHED
EN ISO 17892-10:2018
60.60 Standard published
Dec 19, 2018