EN 12976-1:2017

Thermal solar systems and components - Factory made systems - Part 1: General requirements

Publication date:   Mar 16, 2017

General information

99.60 Withdrawal effective   Dec 8, 2021

CEN

CEN/TC 312 Thermal solar systems and components

European Norm

27.160   Solar energy engineering

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This European Standard specifies requirements on durability, reliability and safety for Factory Made solar heating systems. The standard also includes provisions for evaluation of conformity to these requirements. Concept of system families is included, as well.
The requirements in this standard apply to Factory Made solar systems as products. The installation of these systems including their integration with roofs or facades is not considered, but requirements are given for the documentation for the installer and the user to be delivered with the system (see also 4.6).
External auxiliary water heating devices that are placed in series with the Factory Made system are not considered to be part of the system. Cold water piping from the cold water grid to the system as well as piping from the system to an external auxiliary heater or to draw-off points is not considered to be part of the system. Piping between components of the Factory Made system is considered to be part of the system. Any integrated heat exchanger or piping for space heating option (see Introduction, last paragraph) is not considered to be part of the system.

Related legislation

Legislation related to this standard

811/2013

Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device

812/2013

Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device

814/2013

Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks

Life cycle

PREVIOUSLY

Replaces
EN 12976-1:2006

NOW

WITHDRAWN
EN 12976-1:2017
99.60 Withdrawal effective
Dec 8, 2021

REVISED BY

PUBLISHED
EN 12976-1:2021