EN ISO 15614-8:2002

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) EN ISO 15614-8:2002

Publication date:   Jun 11, 2004

General information

99.60 Withdrawal effective   Apr 6, 2016

CEN

CEN/TC 121 Welding and allied processes

European Norm

25.160.10   Welding processes

Buying

Withdrawn

Language in which you want to receive the document.

Scope

1 Scope
This European Standard specifies requirements for the qualification testing of welding procedures for the arc welding of tube to tube-plate joints in metallic materials by manual, partly mechanized, mechanized or automatic processes.
This standard is a part of a series of standards. Details of this series are given in prEN ISO 15607, Annex A. Qualification by tube to tube-plate joint tests can be used for all joints even if they are fully loaded or only seal welded as required in application standards.
In such cases, one or more special test pieces should be made to simulate the production joint in all essential features, e.g. dimensions, restraint, heat sink effects. The test should be carried out prior to and under the conditions to be used in production.
This standard applies to fusion welding of metallic materials for tube to tube-plate joints with gap. This standard does not apply to tube-sheets with forged end connections with welded tubes (external/internal bore welds). For welding of tube to tube-plate joints without gap welding procedure test should be defined in the specification.
For other applications and/or requirements the standard can be used if required by the specification.
Repair welding should be considered in the welding procedure test.

Related legislation

Legislation related to this standard

97/23/EC

Pressure equipment

Harmonized/Supporting

Life cycle

NOW

WITHDRAWN
EN ISO 15614-8:2002
99.60 Withdrawal effective
Apr 6, 2016

REVISED BY

PUBLISHED
EN ISO 15614-8:2016