EN 12312-1:2001+A1:2009

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs EN 12312-1:2001+A1:2009

Publication date:   Oct 30, 2009

General information

99.60 Withdrawal effective   Jan 30, 2013

CEN

CEN/TC 274 Aircraft ground support equipment

European Norm

49.100   Ground service and maintenance equipment

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This Part of EN 12312 deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of passenger stairs when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognized as essential by the health and safety authorities, aircraft and vehicle manufacturers as well as airlines and handling agencies.
This standard applies to:
- self-propelled stairs with seated driver (see annex A);
- pedestrian controlled stairs;
- towable stairs equipped with powered means, e.g. for height adjustment, stabilizers (see annex A);
- automatic levelling systems of stairs;
for embarking/disembarking of passengers.
NOTE 1 Powered should be also understood as manual effort stored in springs or hydraulic accumulators, etc., the dangerous action of which can be produced or can continue after the manual effort has ceased or directly applied manual effort for lifting or lowering loads.
NOTE 2 Those clauses of this standard that can apply may also be used as a guideline for the design of towable stairs without powered means.
This standard does not apply to pneumatic systems.
This standard does not establish requirements for hazards caused by noise and vibration.
This Part of EN 12312 is not applicable to passenger stairs which are manufactured before the date of publication by CEN of this standard.
This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.
Noise is dealt with in EN 1915-4.

Related legislation

Legislation related to this standard

98/37/EC

Machinery

2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized/Supporting

Life cycle

NOW

WITHDRAWN
EN 12312-1:2001+A1:2009
99.60 Withdrawal effective
Jan 30, 2013

REVISED BY

PUBLISHED
EN 12312-1:2013