prEN 13390 rev

Food processing machinery - Pie and Tart Machines - Safety and hygiene requirements

General information

00.98 Proposal for new project abandoned   Jun 29, 2017


CEN/TC 153 Machinery intended for use with foodstuffs and feed

European Norm

67.260   Plants and equipment for the food industry


This standard specifies safety and hygienic design requirements for the manufacture of machines used for the production of pies, tarts, pasties, en croute products and other similar items where the pastry cases are formed by the closing under pressure of one or more forming heads. The standard applies to the following three basic types of machine : ⎯ machines where operators hands enter hazard zone 1 (see 4.1) at each cycle ; ⎯ machines which are loaded outside hazard zone 1 ; ⎯ automatic machines. Figure 1, 2 and 3 illustrate examples of these. Automatic loading devices are not covered by this standard. This standard applies to electrically, pneumatically and hydraulically powered machines. Manually operated machines are excluded from the scope of this standard. Clause 4 lists the significant hazards identified on these machines on the basis of a risk assessment carried out following the principles in EN 1050:1996. The safety and hygiene requirements take into account the hazards arising from use (including setting, process changeover, operation), cleaning and maintenance. Hazards arising from foreseeable misuse (3.12, EN 292-1:1991) are also included. Flour dust is not a significant hazard at pie and tart machines. A noise test code is included in Annex B to assist manufacturers to measure noise level for the purpose of the noise emission declaration. This document in not applicable to pie and tart machines which are manufactured before the date of publication of this document by CEN.

Related legislation

Legislation related to this standard


Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Life cycle


EN 13390:2002+A1:2009


prEN 13390 rev
00.98 Proposal for new project abandoned
Jun 29, 2017