EN 416-1:2009

Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety EN 416-1:2009

Publication date:   Sep 30, 2009

General information

99.60 Withdrawal effective   Oct 9, 2019

CEN

CEN/TC 180 Decentralized gas heating

European Norm

91.140.40   Gas supply systems

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as 'appliances'.
This standard is applicable to Type A2, A3, B12, B13, B22, B23, B42, B43, B52, B53, C12, C13, C32 and C33 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means located upstream of the draught diverter, if provided.
This standard is not applicable to:
a) appliances designed for use in domestic dwelling;
b) outdoor appliances;
c) appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas);
d) appliances having fully pre-mixed gas and air burners in which:
1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or
2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone;
e) appliances that are designed for continuous condensation within the flue system under normal operating conditions;
f) appliances having combustion products evacuation ducts that are non-metallic.
This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals.
NOTE Requirements for appliances which are not intended to be type tested would need to be subject to further consideration.
Requirements concerning the rational use of energy have not been included in this European Standard.

Related legislation

Legislation related to this standard

89/106/EEC

Construction products

Harmonized/Supporting
90/396/EEC

Appliances burning gaseous fuels

Harmonized/Supporting
2009/142/EC

Appliances burning gaseous fuels

Harmonized/Supporting
305/2011

Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec

Harmonized/Supporting

Life cycle

PREVIOUSLY

WITHDRAWN
EN 416-1:1999

WITHDRAWN
EN 416-1:1999/A1:2000

WITHDRAWN
EN 416-1:1999/A2:2001

WITHDRAWN
EN 416-1:1999/A3:2002

NOW

WITHDRAWN
EN 416-1:2009
99.60 Withdrawal effective
Oct 9, 2019

REVISED BY

PUBLISHED
EN 416:2019

PUBLISHED
EN 17175:2019