CEN/TR 15281:2006

Guidance on Inerting for the Prevention of Explosions CEN/TR 15281:2006

Publication date:   Mar 28, 2008

General information

99.60 Withdrawal effective   Oct 19, 2022

CEN

CEN/TC 305 Potentially explosive atmospheres - Explosion prevention and protection

Technical Report

13.230   Explosion protection

Buying

Withdrawn

Language in which you want to receive the document.

Scope

Inerting is a measure to prevent explosions. By feeding inert gas into a system which is to be protected against an explosion, the oxygen content is reduced below a certain concentration until no explosion can occur. The addition of sufficient inert gas to make any mixture non-flammable when mixed with air (absolute inerting) is only required in rare occasions. The requirements for absolute inerting will be discussed. Inerting may also be used to influence the ignition and explosion characteristics of an explosive atmosphere.
The guidance given on inerting is also applicable to prevent an explosion in case of a fire.
The following cases are not covered by the guideline:
- admixture of an inert dust to a combustible dust;
- inerting of flammable atmospheres by wire mesh flame traps in open spaces of vessels and tanks;
- fire fighting;
- avoiding an explosive atmosphere by exceeding the upper explosion limit of a flammable substance.
Inerting which is sufficient to prevent an explosion is not a protective measure to prevent fires, self-ignition, exothermic reactions or a deflagration of dust layers and deposits.

Life cycle

NOW

WITHDRAWN
CEN/TR 15281:2006
99.60 Withdrawal effective
Oct 19, 2022

REVISED BY

PUBLISHED
CEN/TR 15281:2022