CEN/TS 14966:2005

Wood-based panels - Small scale indicative test methods for certain mechanical properties CEN/TS 14966:2005

General information

90.93 Standard confirmed   Jan 21, 2009

CEN

CEN/TC 112 Wood-based panels

Technical Specification

79.060.01   Wood-based panels in general

Scope

This Technical Specification specifies small-scale test methods for estimating the following mechanical properties of wood-based panels:
- indicative planar shear strength (sometimes referred to as block shear);
- indicative panel shear strength;
- indicative strength and modulus of elasticity in tension in the plane of the panel;
- indicative strength in compression in the plane of the panel.
Reference should be made to EN 310 for bending properties. For plywood, EN 314 1 may also be used as an indicator of planar shear strength.
These test methods are intended for indicative purposes only and should not be used as a means of determining structural design values. They may not be suitable for all panel types. They may be used as a means of supporting quality control procedures for structural panels, if correlations with EN 789 test results can be established (CEN Technical Report in preparation).

Related legislation

Legislation related to this standard

89/106/EEC

Construction products

305/2011

Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec

Life cycle

NOW

PUBLISHED
CEN/TS 14966:2005
90.93 Standard confirmed
Jan 21, 2009