Published
Specifies standardized nominal cross-section areas from 0,5 mm2 to 2 000 mm2, numbers and diameters of wires and resistance values of conductors in electric cables and flexible cords. Classifies conductors for: 1.Cables for fixed installations -Class 1, solid conductors; -Class 2, stranded conductors. 2.Flexible copper conductors -Class 5, -Class 6 (more flexible than Class 5). Includes table of temperature correction factors kt for conductor resistance to correct the measured resistance at t °C to 20°C. Does not apply to conductors for telecommunication purposes. Applies to conductors of special design only when stated in the specification for the type of cable. Conductors of special design are, for example. conductors for pressure cables, conductors in extra-flexible welding cables or in special types of flexible cables for having the cores twisted together with unusually short lays. This publication supersedes EN 60180 (1965). Note: -In this edition, the number of classes of conductors has been reduced from 6 to 4.
Legislation related to this standard
Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
Harmonized/SupportingDirective 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Harmonized/Supporting
WITHDRAWN
HD 383 S2:1986/A1:1989
WITHDRAWN
HD 383 S2:1986
WITHDRAWN
HD 383 S2:1986/A2:1993
PUBLISHED
EN 60228:2005
60.60
Standard published
Feb 10, 2005
PUBLISHED
EN 60228:2005/corrigendum May 2005
PUBLISHED
EN IEC 60228:2024
