EN 60034-9:1993

Rotating electrical machines - Part 9: Noise limits EN 60034-9:1993

General information

99.60 Withdrawal effective   May 1, 1998

CENELEC

CLC/TC 2 Rotating machinery

European Norm

17.140.20   Noise emitted by machines and equipment | 29.160.30   Motors

Scope

This International Standard specifies maximum permissible A-weighted sound power levels for rotating electrical machines complying with IEC 34-1, having methods of cooling according to IEC 34-6 and degrees of protection according to IEC 34-5, and having the following characteristics: - standard design, either a.c. or d.c. , without special electrical, mechanical, or acoustical modifications intended to reduce the noise level; - rated output from 1 kW (or kVA) to 5 500 kW (or kVA); - speed not greater than 3 750 rev/min. NOTES 1. This standard recognizes the economic reason for the availability of standard noise-level machines for use in uncritical areas or for use with supplementary means of noise attenuation. 2. Where noise levels lower than those specified in table 1 are required, these should be agreed between the manufacturer and the purchaser, as special electrical, mechanical, or acoustical design may involve additional cost. The object of this standard is to establish maximum permissible A-weighted sound power levels, Lw, in decibels, dB(A), for airborne noise emitted by rotating electrical machines of standard design, as a function of power and speed, and to specify the method of measurement and the test conditions appropriate for the determination of the sound power level of the machines to provide a standardized evaluation of machine noise up to the maximum permissible sound power levels. NOTE - Noise-level limits specified in table 1 take account of the inherent differences between machines with different methods of cooling and different types of enclosure.

Related legislation

Legislation related to this standard

2006/95/EC

Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)

Harmonized/Supporting

Life cycle

PREVIOUSLY

WITHDRAWN
HD 53.9 S1:1978

NOW

WITHDRAWN
EN 60034-9:1993
99.60 Withdrawal effective
May 1, 1998

CORRIGENDA / AMENDMENTS

WITHDRAWN
EN 60034-9:1993/A1:1995

REVISED BY

WITHDRAWN
EN 60034-9:1997

Relations

Adopted from IEC 60034-9:1990 MODIFIED

Adopted from IEC 60034-9:1990/corrigendum Mar. 1991 MODIFIED